Check Your Presser Foot - Kenmore 19502 Owner's Manual

Prepare Your Top Thread
o Check Your Presser Foot
Your presser foot is held in place by a Foot Holder. Each presser foot merely
snaps on the foot holder, which is seldom removed.
If you need to remove or attach the foot holder, here is what you do:
To Remove:
Foot _
holder
screw \-_
To Attach:
Presser bet-
@
To Remove:
Turn the screw toward the hack of the
machine, Use the large screw driver.
To Attach :
1. Match the hole in the foot holder
with the threaded hole in the
presser bar.
2. Fit the foot holder screw into the
hole.
3. Tighten the screw by turning it
toward you.
22