To Clean Agitator; To Replace Belt; Belt Routing - Kenmore 116.33726 Owner's Manual

TO CLEAN AGITATOR
NOTE: In order to keep cleaning efficiency
high and to prevent damage to your vacu-
um, the agitator must be cleaned every time
the belt is chanaed.
The agitator must be cleaned according to
the following schedule:
V_quum Use
HEAVY
(used daily)
MODERATE
(used 2-3 times/week)
Clean Aaitator
every week
every month
LIGHT
(used 1 time/week)
every 2 months
Remove any dirt or debris in the belt path
area or in the agitator area.
Exploded View - Agitator
Assembly
Belt End
Pulley Cap
Carefully remove
the brush end
caps and remove
any string or
debris located on
the agitator
assembly, end
caps or agitator
shaft.
NOTE: Replace the end caps. See the
exploded view for correct assembly.
TO REPLACE BELT
Make sure that the carpet/bare floor selec-
tor is in the carpet position.
Loop the new belt on the motor shaft. Loop
new belt over belt pulley on agitator.
Motor
Shaft
Belt
\
Uarp_UBare i-IGor
Y_lley Belt
BELT ROUTING
Correct Routing of Belt
(Selector in Carpet Position)
Carpet/Bare Floor Shaft
Selector Shaft
Incorrect Routing of Belt
(Belt on Selector Shaft)
f _ d_-_,, arpet/Bare
Agitator _ Motor
Carpet/Bare Floor Shaft
Selector Shaft
Incorrect Routing of Belt
(Selector in Bare Floor Position)
I ,\ C rpet/Bare
I' , FI Floor Pedal
Agitator Carpet/Bare Floor
Belt Selector Shaft
17