NEC Storage Performance Monitor/Optimizer User Manual page 99

Table 6-6 Detailed Information Display Items for Movement Progress Information
Display item
Disk Array Subsystem
Source RANK
Source LD
Destination RANK
Destination LD
Progress Ratio [%]
State
Speed of Movement
Start Time
End Time
Chapter 6 Operation of Performance Optimization Function (GUI)
Displays the disk array name for a logical disk being moved.
Displays the RANK number for a logical disk being moved.
Displays the logical disk number being moved.
Displays the RANK number for the destination Work Disk for Optimization.
Displays the logical disk number for the destination Work Disk for Optimization number.
Displays the movement progress rate in percentage.
Displays the movement state. Displayed contents are as follows:
Moving ..... Indicates that a disk is being moved.
Complete ..... Indicates that the disk transfer has been finished normally.
Discontinue ..... Indicates that the disk transfer is being cancelled.
Discontinuation ..... Indicates that the disk transfer has cancelled due to a cancellation
Scheduled ..... Indicates that movement has been registered in schedule.
Changing schedule ..... Indicates that registered movement schedule is being changed.
Schedule canceled ..... Indicates that registered movement schedule has been canceled.
Schedule failed ..... Indicates that register movement schedule has failed.
Fault ..... Indicates that abnormal termination of the disk transfer has occurred
By moving a logical disk, all data contained in the source logical disk is copied to the destination
Work Disk for Optimization. This area displays the speed of moving the data. Displayed
contents are as follows:
auto .... The movement speed is automatically adjusted according to the operating
state of the disk array.
high .... A disk is moved at maximum data transfer speed.
Displays the disk transfer start time.
Displays the disk transfer end time. A blank is displayed if the state is "Moving" or "Scheduled".
If the state is "Schedule canceled", time of canceling the schedule is displayed, and if the state is
"Interrupted" or "Fault", time of interrupting movement is displayed.
Description
request.
due to a fault.
II-17