Advertisement
Your new "IV MonitodReceiver
features
a solid
state chassis that is designed to give you many
years of enjoyment.
It was thoroughly tested and
tuned at the factory for best performance.
Customer
Record
The model and sedal number of this product may
be found on the back of the unit. You should note
the modet and serial number in the space provided
and
retain
as
a permanent
record
of
your
purchase. This will aid in identification in the event
of theft or loss.
Model
Number
Serial
Number
Care
and Cleaning
Screen (Turn TV Off)
Use a mild soap solution or window
cleaner with a soft clean cloth. DO NOT
USE ABRASIVE CLEANERS.
Avoid excessive moisture and wipe dry.
Cabinet and Remote Control
Use a soft cloth dampened with water or
a mild detergent solution.
Do not use
benzene,
thinner, or other petroleum
based cleaners.
Wipe dry with a soft, cle_n cloth.
Avctd
excessive moisture.
Specifications
Power Source
CT-20G14D
CT-t3R30C
CT-20G24D
CT-13R40C
120V AC, 60Hz
CT-20R16C
CT-13R50D
Video input Jacks
(some models)
_dio:lnp_
_ks
(som_ m0dels_
To Audio AMP Jack
(some models)
t Vp.p, 75 Ohm,
Phono Jack Type
_00mV RMS
47K Ohm
0-2.0V RMS
4.7K Ohm
Specifications are subject to change without notice
or obligation.
Television
Location
This unit is intended to be used with an optional
stand or entertainment center. Consult your dealer
for available options.
(_
Avoid excessive
sunlight or bright lights,
including reflections.
{_
Keep away from excessive heat or moisture.
Inadequate
ventilation may cause
intemal
component failure.
C3
Fluorescent
lighting" may
reduce
Remote
Control transmitting range.
Avok:t magnetic equipment, including motors,
fans, or external speakers.
Optional
Cable Connections
Shieldod audio and video cables should be used
between components.
For best resuffs:
Use 75-ohm coaxial shielded cebies.
Use
apprepriete
input
and
output
connectors
that match your component
connectors.
Avoid
tong
cables
to
minimize
intederence.
AC Power Supply
Cord
CAUTION:
TO
PREVENT
ELECTRIC
SHOCK,
MATCH
WIDE BLADE dOF PLUG TO
WIDE SLOT OF AC OUTLET
Polarized plug
AND FULLY INSERT.
DO NOT USE A PLUG
WITH
A RECEPTACLE
OR
OTHER
OUTLET
UNLESS THE BLADE CAN BE FULLY INSERTED
TO PREVENT BLADE EXPOSURE.
Cable / Antenna
For proper reception, either a cable or antenna
connection is required.
Cable Connection
Connect the cable supplied by your local
cable company.
No_:
A cable converter box may be required
for proper reception. Check with *your
local Cable company for compatibility
requirements.
Incoming Cable from Cable Company
a!,
75 Ohms VHFAJHF
On Backof TV
Read these Instructions completely before
operat_g TV.
Contents are subject to change without notice
or obligation.
point
arrow
head
wllhin
a
within a td=ngle is intended
triangle
is intended
to
to
tell
the
user
that
dsk of electric shock to
the
papers
with
the
persons,
appliance.
WARNING:
To prevent fire or shock hazard, do
not expose this appliance to rain or moisture.
-2-
Advertisement
