Set-Back Configuration Setup - Mitsubishi Electric LT-4260 Owner's Manual

Set-Back Configuration Setup
1. Place the 42" LCD Display on a sturdy surfi/ce.
2. Remove the HD-6000 Receiver/Controller from its carton.
3. Remove the protective material from around the HD-6000 and place it on a sturdy surface.
4. J)rn the HD-6000 over so that the bottom is _acing up and gently place it on the protective material.
5. Attach the 4 Mounting Hooks.
SCREW(M4:2 PIECES x 4 PLACES) TO
BOTTOM SURFACE OF FID6000
SCREW TORQUEiIS_2Okgfcm
Pro_ective Sheet
\
\
\
\
\
\ /
_FID6000
16