Table of Contents
Advertisement
28
Chapter
2. TV Connections
VCR to an Antenna or Wall Outlet
Cable
Required: Two-way RF splitter, 3 coaxial cables, right and
left analog audio cables, either S-video or video cable.
These are not included with the TV but are available at
most electronics stores.
1.
Connect the incoming cable or antenna to IN on the
RF splitter.
2.
Connect one coaxial cable from OUT on the RF split-
ter to ANTENNA
IN on the VCR back panel.
3.
Connect one coaxial cable from OUT on the RF split-
ter to ANT
l/MAIN
on the TV back panel.
4.
To use the TV speakers with the VCR, connect left
(white) and right (red) audio cables from AUDIO
OUT on the VCR to INPUT/AUDIO
LEFT and
AUDIO
RIGHT
on the TV back panel, If your VCR is
mono (non-stereo), connect only the white (left) cable,
5.
Connect either an S-Video or composite video
cable from VIDEO
OUT on the VCR back panel to
INPUT/VIDEO
or S=VlDEO
on the TV back panel.
Connect only one type of video cable; S-Video is
recommended,
if available.
Optional
To record high-definition
digital channels converted
to analog standard-definition
video and analog stereo
audio, perform these two additional steps.
6.
Connect left (white) and right (red) audio cables
from AUDIO
IN on the VCR to MONITOR
OUT
LEFT/RIGHT
on the TV back panel. If your VCR
is menu (non-stereo), connect only the white (left)
cable.
7.
Connect a composite video cable from VIDEO
IN on the VCR back panel to MONITOR
OUT/
VIDEO
on the TV back panel.
VCR back panel
Incoming
Cable
1.
RF Splitter
MONITOR
OUT
_.® 0to
Figure 9. Connecting a VCR to an Antenna or Wall Outlet Cable
Hide quick links:
Advertisement
Table of Contents
