Step 3: Plug in the TV
Plug the end into the wall outlet, matching
the wide blade of the
plug with the wide slot in the outlet. Be sure to insert the plug
completely.
Step 4: Place
Batteries
in Remote
Remove the battery compartment
cover from the back of the
remote.
Insert fresh batteries.
Make sure that the polarities
(+ and -)
are aligned correctly.
Replace the cover.
Step 5: Turn
On the TV
Press TV on the remote, or press POWER on the TV itself.
Pressing the TV button not only turns on the TV, but puts the
remote into TV mode, so that the buttons
on the remote will
control TV functions.
Step
6:
Program
the
TV
Proceed to the next section, Interactive
Setup. The interactive
setup routine walks you through
the steps needed to configure
the TV.
10