Jacks On The Back Of Your Tv - GE 27GT630YX51AA5 User Manual

ConnecHons & Setup
Jacks on the Back of Your TV
If you are connecting many components, please consult the manual that came with each
component for connection instructions. The picture of your TV's back panel describes the
lacks on the back of your TV and what types of componenls that you can connect to these lacks.
When connecting, make sure you connect Output]acks to Input]acks, Video to Video, Right
Audio to Right Audio, etc.
Audio and Video Input Jacks:
AUDIO R and L and VIDEO
Connect any of the following components:
• DVD Player • Satellite Receiver
• Laserdisc Player • VCR
• InternetAccess Device
To watch the content from the component that's
connected to the VIDEO Input Jack, press the
WHO • INPUT button on the remote (the TV
switches to the correct channel).
(back panel)
AUDIO
VIDEO R L
#
G-LINK
/
G-LINK Jack
Connect the end of the
C-LINK cable (provided) to this
lack. The G-LINK cable enables
the TV's Guide Plus+ system to
interact with the cable box
and/or the VCR. A picture of
the (;-LINK cable is on page 7.
_ CABLE/
ANTENNA
CABLE/ANTENNA Jack
Connect the coaxial cable from
the VCR's Output]ack to this
lack. If you're not connecting a
VCR, connect a coaxial cable
that carries the signal from the
antenna, cable, or cable box to
the C_BLE/ANTENNA]ack.
12 Chapter I