Table of Contents
Advertisement
About
Programming
the Remote
The remote
can be programmed
to control
other
brands
of
remote
controllable
TVs. It is already
programmed
to
operate
most
GE, RCA, and PROSCAN
televisions.
Programming
the Remote
to
Control
a TV
If the TV does not turn
on when
you press the TV button,
the remote
needs to be programmed.
Follow
these steps to program
the remote
to control
your
particular
TV:
1.
Turn on theTV.
2.
Find your
TV brand
and code
number(s)
on the code
list on the next page.
3.
Press and hold the TV button
on the remote.
4.
Enter the code from
the code
list.
5.
Release
TV, and then
press CHAN
up or down.
If the TV
responds
to the remote
commands,
the remote
is
programmed.
6.
If the TV does
not respond,
repeat
these steps
using
the next code
listed for your
TV's brand.
/ ©_t.OF F
O
O
MUTE
C_AN
GO BACK
Operating
the TV
After
you set up the remote,
see which
buttons
operate
your
TV.
1.
Point
the remote
at the TV, and press the TV button.
If the TV does
not turn
on, press the TV button
and
then
press the ON-OFF
button.
.
You may want
to experiment
to see which
buttons
operate
your TV. Try pressing
buttons,
such as VOL
and MUTE.
See "TV Function
Buttons"
in the VCR
Basics
Section
for details.
This remote may not operate all
models of the brands that are
shown.
Note the difference between the TV
and VCR on-screen displays to see
which one the remote is operating.
36
Advertisement
Table of Contents
