Stopping A Timer Recording; Copying And Editing Tapes - GE 13TVR70 User Manual

,qBhm_n_J
Copying and Editing Tapes
Operating Instructions (Re€or to hookup on
page
27.)
Use another VCR or camcorder as the playback VCR and
the TV/VCR as the recording VCR.
Caution: The unauthorized
recording of television
programs and other
materials may infringe the
rights of others.
3. Turn on the VCR or camcorder and the TV/VCR.
2. Press INPUT or 00 to select the line input (VIDEO).
3. Insert the tape you want to copy into the playback VCR
or camcorder. Insert a blank tape with safety tab intact
into the TV/VCR.
4.
Start the playback VCR or camcorder playing. If the
tape was not recorded on the playback VCR, streaks
may appear and you may need to adjust the tracking.
When you reach the place you want to begin copying,
place the playback VCR or camcorder in play pause.
5. Press REC, then PAUSE, on the TV/VCR's remote.
6.
7.
8.
Press PAUSE on both the VCR or camcorder and the
TV/VCR's remote at the same time to begin copying
the tape.
Edit out segments that you do not want to copy by
pressing PAUSE on the TV/VCR's remote to stop
copying the tape. Then, locate the next segment you
want to copy on the playback VCR or camcorder by
using FF, REW, or PLAY. Press PAUSE on the playback
VCR or camcorder. Press PAUSE at the same lime on
both the VCR or camcorder and the TV/VCR's remote
to resume copying.
Press STOP on both the VCR or camcorder and the
TV/VCR's remote when you are finished.
Remember to press INPUT on the TV/VCR's remote for
normal TV viewing on the TV/VCR.
VIDEO
REC STop
INPUT
22