Partial Scan Channels
You can partially scan for network signal within a specified range of channels.
1
Press MENU.
2
to select "Partial Channel Scan", then press or OK.
Press
or
3
to select "Scan Mode", then press or OK.
Press
or
4
to select an option, then press OK.
Press
or
"Analog/Digital": scan for both analog and digital channels
"Analog": scan for analog channels
"Digital": scan for digital channels
5
Press
or
to select "From Channel", then enter a starting channel range.
6
Press
or
to select "To Channel", then enter an ending channel range.
7
to select "Start Scan", then press OK.
Press
or
Scanning progress is displayed on the menu screen. To stop scan, select "Stop Scan" and press OK.
Add Channel
New channels may be added to your area periodically. Use the Add Channel function to add new
channels.
1
Press MENU.
2
to select "Channel", then press or OK.
Press
or
3
to select "Find Channel", then press or OK.
Press
or
4
Press
or
to select "Enter Channel", then enter a channel.
5
to select "Add Channel", then press OK.
Press
Added channels are listed on the Channel List screen.
Delete Channel
To remove a channel from the Channel List screen.
1
Press MENU.
2
to select "Channel", then press or OK.
Press
or
3
to select "Channel Management", then press or OK.
Press
or
4
Press
or
, then press OK to mark the channels that you want to remove from the Channel List.
5
Press RETURN to close the menu screen.
Sleep Timer
Sleep timer sets the TV to automatically turn off after a preset amount of time. See page 21.
Adjusting the Menu Settings
33