Advertisement
CUSTOMER
ASSISTANCE
To assist in reporting
this appliance,
please record
below the model number
and serial number
located
on the unit. We also
suggest you record all the information
listed and retain for future reference.
MODELNUMBER
DATEOFPURCHASE
DEALER
SERVICER
/
/
SERIALNUMBER
TELEPHONE
TELEPHONE
TO PHONE:
DIAL
TO WRITE:
1-800-BE-SHARP
(23%4277)
for:
SERVICE
(for your nearest Sharp Authorized
Servicer)
PARTS (for your authorized
parts distributor)
ADDITIONAL
CUSTOMER
INFORMATION
Sharp Electronics
Corporation
Customer
Assistance
Center
1300 Naperville
Drive
Romeoville,
IL 60446-1091
Please provide
the following
information
when you write or call: model number,
serial number,
date of purchase,
your complete
mailing
address
(including
zip code), your daytime
telephone
number
(including
area code), your email address and description
of the problem.
TO ACCESS
INTERNET:
www.sharpusa.com
L ;TRI ;AL
I
r{
A 120V, single phase, 60 Hz, AC only 15 or 20 amp electrical
supply,
properly grounded
in accordance
with the National
Electric code and
local codes and ordinances
is required.
The
appliance
is equipped
with
a three-prong
grounding
plug for protection
against possible electric shock hazards.
It must be plugged into a dedicated,
grounded,
electrical
outlet. If only
a two-prong
electrical
outlet is available,
it is the responsibility
of
the customer
to have it replaced
with a dedicated,
properly
grounded
three-prong
electrical
outlet. Do not under any circumstances:
•
Cut or remove the third (ground)
prong from the powercord.
•
Use a power cord that is frayed or damaged.
•
Connect
the appliance
to an extension
cord.
•
Do not use an adaptor
to fit plug to outlet.
Note: Use of a ground fault interrupter
(GFI) is not recommended.
* Serial
Number
is Jocated
on Name
PJate
Advertisement
