Connecting To External Equipment - Sharp Aquos LC-19DV28UT Operation Manual

Connecting to External Equipment
You can connect many types of external equipment to your TV/DVD. To view external source images, select the
input source from INPUT on the remote control unit or on the TV/DVD. (See page 15.)
For connecting the TV/DVD to external equipment, use commercially available cables.
• To protect equipment, always turn off the TV/DVD before connecting any external equipment.
• Please read the relevant operation manual (Blu-ray disc player, etc.) carefully before making connections.
• When using HDMI cable (INPUT 3):
The HDMI (High Definition Multimedia Interface) terminal is an audio-video interface that enables a connection for audio and
video signals using a single cable. The HDMI terminal supports high-resolution video input.
• Blu-ray disc player
• DVD player
• HD cable/satellite set-top box
Rear of the TV
HDMl-certified cable
• Supported Audio format: Linear PCM (sampling rate 32/44.1/48kHz) and Dolby Digital.
• Digital Audio output is not available when using an HDMI input.
• When using DVI-HDMI conversion cable (INPUT 3):
• Blu-ray disc player
• DVD player
• HD cable/satellite set-top box
Rear of the TV
AUOiO A 7;}i0
0 3.5 mm stereo minijack cable
_ t
DVI-HDMt conversion cable
I PC/_DMI (
• When using an DVI-HDMt conversion cable, you should make an analog audio connection. In this case, in addition to
connecting an DVt-HDMt conversion cable to the INPUT 3 (HDMI) terminal, connect an audio cable to the AUDIO PC/HDMI
terminal and set "HDMI Audio" to "DVI". (See page 28.)
(_-16