Advertisement
Peripherals - Pocket Service Guide
1.44 MB FDU
There are no jumpers to be set on this drive and for this reason the drive does not have any.
Density Mode and Drive Select are fixed and have already been set by Mitsumi as follows:
Density Mode = Auto Select
Drive Select = Drive 0
D359C drives are installed on systems where they cannot be fitted as second drives.
1.44 MB FDU
JUMPERS
JUMPERS
1.44 MB FDU
There are no jumper settings to be made on this drive and consequently there are no jumpers
present. The Density Mode and Drive Select parameters cannot be changed and are
factory-set by Mitsumi as follows:
Density Mode = Auto Select
Drive Select = Drive 2.
3.5" MICRO FLOPPY DISK DRIVES
MITSUMI D359C
SONY MPF520-3
POWER SUPPLY
CONNECTOR
DRIVE SELECT 1
(configuration to use)
POWER SUPPLY
CONNECTOR
MITSUMI D359T5
SA450
SA450
DRIVE SELECT 0
(Do not use)
SA450
4
4-21
Advertisement
