Advertisement
Loosen the knob shown in Fig. 5,
to tilt the pan head to
90°.
Tighten
the knob to lock position.
Loosen the pan head handle
(Fig. 6) by twisting counter-
clockwise. The pan head can
be tilted by moving handle up or
down. Tighten the handle to lock
the position.
Loosen the knob (B) to pan the
head left or right: tighten the
knob to lock the position.
FIG.~
<fhG
MAINTENANCE
This Tripod has been designed to be a low-maintenance
tool.
However, in order to maintain its performance, you must always
follow these simple directions.
1. AVOID exposing the tool to shock, continuous vibration or extreme
hot or cold temperature.
2. ALWAYS store the tool indoors. When not in use, store the tool in
its protective case.
3. ALWAYS clean and thoroughly dry the tool after each use.
4. Tool service MUST BE performed only by a Sears Parts and
Repair Center. Service or maintenance performed by unqualified
personnel could result a risk of injury.
5
Advertisement
