Troubleshooting-Dvd - Sharp AQUOS LC-32DV28UT Operation Manual

Appendix
Troubleshooting=DVD
Problem
Playback doesn't start.
Possible Solution
, No disc is inserted. (See page 29.)
, The disc may be dirty. Clean up the disc. (See page 7.)
, The TV/DVD cannot play CD-ROMs, etc. (See page 6.)
No picture. _ TV/DVD selector is not set correctly. (See page 29.)
No sound. _ Check the input selector of the amplifier is set properly.
The TV/DVD is in the special playback mode. (See page 30.)
Select the correct Audio Output position on AV amplifier.
Picture is distorted during fast _ The picture will be distorted occasionally.
reverse/forward playback.
Stopping playback, search, _ Some discs may not do some of the functions.
slowmotion play, repeat play, or
program play, etc. cannot be
performed.
No surround sound. _ The setup does not match your stereo system.
The TV/DVD or remote operation _ Turn off the TV/DVD and unplug the AC power cord for several minutes, then
key is not functioning, replug it.
Playback does not start when the _ Check the Parental setup. (See page 36.)
title is selected.
Audio soundtrack and/or subtitle _ Multilingual language is not recorded on the DVD disc. (See page 31 .)
language is not changed when
you playback a DVD.
No subtitle. _ Some discs have no subtitles. (See page 31 .)
Subtitles are cleared. Press SUBTITLE. (See page 31 .)
Angle cannot be changed. _ Multi-angles are not recorded on the DVD disc. (See page 31 .)
"This operation can't be performed" _ The function is prohibited with the TV/DVD or the disc. (See page 29.)
appears on the screen.
Cautions regarding use in high and low temperature environments
, When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly
delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal.
Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a
heater, as this may cause the cabinet to deform and the Liquid Crystal panel to malfunction.
Storage temperature: -4°F to +140°F (-20°C to +60°C)
CLEARING THE PASSWORD
If you forget the password, clear the password using the following procedure.
®®©
SKIP REV FWD SKIP
STILL/PAUSE
PLAY
STOP
CSD C_ CK3
1 Press and hold both VOL- on the TV/DVD and
press 0 on the remote control simultaneously for
a few seconds until MENU screen appears on the
screen.
2 Now the old password was cleared. You can set
the new password.
(Illustration is LC-26DV28UT.)
The password is LLLLJ "
As a precautionary measure, make a note of your password above, cut it from this manual, and keep it in a safe place.
(_ = 39