Using Cancel/Drain; Selecting Cycle Options - Whirlpool DP920QWDB3 Use And Care Manual

Using CANCEL/DRAIN
Press CANCEL/DRAIN to cancel a cycle or
to clear the indicators.
To clear the indicators:
Press CANCEL/DRAIN before starting the
dishwasher to clear all cycle and option
selections.
To cancel a cycle:
• Press CANCEL!DRAIN while the dish-
washer is running to start a 2-minute
drain. It will take a few seconds for the
drain to start. If desired, select a new
cycle. (See "Changing a cycle or option
setting" page 14.)
• You can press CANCEL/DRAIN again to
stop the drain immediately. Remember to
drain the dishwasher again before starting
a new cycle.
NOTE: A small amount of water remaining
in the dishwasher is normal.
Selecting cycle options
You can press an Option pad after the
dishwasher starts as long as the cycle is not
past the point that the option is used.
For example, you can press AIR DRY any
time before the DRYING indicator glows.
After a wash cycle, the dishwasher
remembers the options used and uses the
same options in the next wash cycle unless
new options are selected or the CANCEL/
DRAIN pad is pressed.
AIR DRY
When AIR DRY is selected, the air in the
r_ ishwasher is not heated during
the "dry" portion of a cycle.
Using AIR DRY helps save
energy, but dishes take longer to
dry and some spotting can occur.
Some items (such as plastics) may need
towel drying. For best drying, use a liquid
rinse agent.
HIGH TEMP WASH
When HIGH TEMP WASH is selected, the
I_ ishwasher heats the water
during the main wash of the LOW
ENERGY/CHINA and NORMAL
cycles. Heating the water helps
improve washing results. The
POTS-N-PANS cycle automatically uses
HIGH TEMP WASH.
NOTE: The dishwasher automatically
heats the air in the dishwasher during the
"dry" portion of the cycle unless you select
AIR DRY.
13