Table of Contents
Advertisement
Appendix A: Batteries and Answers to Common Questions
Power and Batteries
The calculator is powered by two 3-volt lithium button-cell batteries, CR2032.
When changing batteries, use only fresh button-cell batteries. Both batteries must be changed
at the same time.
Do not use rechargeable batteries.
Low Power Annunciator
When the low battery-power annunciator (
as soon as possible. If the battery annunciator is on and the display dims, you may lose data.
The All Clear message is displayed if data is lost due to low power.
Installing Batteries
Warning! There is a danger of explosion if batteries are incorrectly replaced.
Replace only with the same type of battery or with equivalent batteries (as recommended by
the manufacturer). Dispose of used batteries according to the manufacturer's instructions.
•
The calculator is powered by two 3-volt CR2032 coin batteries.
•
When changing batteries, use only fresh coin-cell batteries. Do not use rechargeable batteries.
•
Do not mutilate, puncture, or dispose of batteries in fire. The batteries can burst or explode, releasing
hazardous chemicals.
•
Do not use new and old batteries together, and do not mix batteries of different types.
1.
Have two fresh CR2032 batteries at hand. Only touch the batteries by their edges.
Wipe each battery with a lint-free cloth to remove dirt and oil.
2. Make sure the calculator is off. When changing the batteries, change the batteries one
at a time to avoid clearing the memory. As a back-up, write down any data that you
have stored and might need for later use.
3. Turn the calculator over and pry off the battery cover.
4. Gently remove one battery.
5. Insert the new battery, making sure that the positive sign (+) battery is facing outward.
6. Gently remove the other battery.
) comes on, you should replace the batteries
Accessing the battery compartment
Appendix A: Batteries and Answers to Common Questions
I
Hide quick links:
Advertisement
Table of Contents
