Dryer Features - GE Appliances Profile PFDS450 Owner's Manual And Installation Instructions

Hide thumbs Also See for Appliances Profile PFDS450:
Table of Contents

Advertisement

Available languages

Available languages

About cycle options.
NOTE: Not oil features ore available on oil
dryer
models.
DRUM
LIGHT
SETTINGS ÷
(m
Press & hold for 3
seconds for secondary
options
Settings
Under the SETTINGSoption, you can
adjust the volume or the brightness of
the display.
VOLUNE
I End of Cycle (signal) volume can be set from
HIGH, NED, LOW or OFF.
I Control Sounds volume can be set from
HIGH, NIED, LOW or OFF.
DISPLAY BRIGHTNESS can be set from HIGH,
PIED or LOW.
After you have made your selection,
press ENTER.
NOTE'. To access the SETTINGS menu, hold
down the DRUM LIGHT button
for 3 seconds.
About dryer features.
Drum
Lamp
Before replacing the light bulb, be sure to unplug the dryer power cord or disconnect the dryer at
the household distribution panel by removing the fuse or switching off the circuit breaker. Reach
above dryer opening from inside the drum. Remove the bulb and replace with the same size bulb.
Engage the handle posts
Built-In
Rack Dry System
A handy drying rack may be used for drying items such as tennis shoes. Place items flat on the
drying rack and block such items as wool sweaters and delicate fabrics. Dry with low heat.
To install the Built-In Rack Dry System
1. Make sure the drum of the dryer is oriented so the rack drying system is on the left side of the
dryer.
2. Pull the drying rack screen out from the left side and engage the handle "posts" in the opposite
baffle slots.
3. Place the garment on the rack and close the door.
4. Press the DRYERRACK button.
5. Select desired time.
6. Press the START/PAUSEbutton.
NOTE:
I Do not use this drying rack when there are other clothes in the dryer.
I Make sure to detach the drying rack at the end of the cycle and fully retract the screen back
into the baffle.
10

Advertisement

Table of Contents
loading

Table of Contents