Controls - GE AEQ24 Owner's Manual And Installation Instructions

About
the controls on the air conditioner
Features and appearance will vary.
Lights next to the touch pads on the air conditioner control panel indicate the selected settings.
Light indicatesthe unit
is in the temperature or
delay time Set mode.
i Auto
w High _Coo_
i
Med
I
Energy Sove_
__ _ ,I LOW
IFon Onlg
(on some models)
Light i ndicates the
delay timer is set.
NOTE: The display always showsthe room
temperature exceptwhen setting tile Set
temperature or the Delaytimer.
Air Conditioner Controls
Controls
Power Pad 0
Turns air conditioner on and off. When turned
on, the display will show the room temperature.
Display
Shows the room temperature or time remaining
on the Delay timer. Shows the Set temperature
while setting the temperature in Cool or Energy
Saver modes. The Set light will turn on while
setting.
O emp Increase A/Decrease T Pads
Use to set temperature when in Cool or Energy
Saver mode. The Set light will turn on while
setting.
Delay Timer Increase A (+)/Decrease T (-)
Pads
Each touch of the Increase A / Decrease T
pads on the unit or the Increase + / Decrease -
pads on the remote control will set the delay
time when using the Delay ./.-24hr timer (_).
The Set light will turn on while setting.
O an Speed Pads
Use to set the fan speed to Low, Mad, High
orAuto on the unit. NOTE: On the remote
control, use the fan speed Increase + /
Decrease - pads to set the fan speeds to Low,
Mad or High. Use the Auto pad to turn Auto
fan on.
Delay 1-24hr
Delaytimer __/__ Delaytimer
Decrease Increase
Mode select Auto Fan
oil
Fanspeed Fan speed
Decrease Increase
Temperature 0 _ @ Unkpower
set Increase on/off
and Decrease
Remote Control
@
Mode Pad
Use to set the air conditioner to Cool, Energy
Saver or Fun Only mode.
Delay Pads
Delay ON--When the air conditioner is off, it can
be set to automatically come on in i to 24 hours
at its previous mode and fan settings.
Delay OFF--When the air conditioner is on,
it can be set to automatically turn off in i to
24 hours.
How to set:
Pressthe Delay 1-24hr pad on the unit or the
Qpad on the remote control. Eachtouch of the
Increase A /DecreaseTpads on the unit or
the Increase + / Decrease - pads on
the remote control will set the timer in
1-hour intervals. The Set light will turn on while
setting.
To review the remaining time on the Delay
:l-24hr timer, press the Delay 1-24hr pad on
the unit or the _ pad on the remote control.
Use the Increase A / Decrease _' pads on the
unit or the Increase + / Decrease - pads on the
remote control to set a new time if desired.
To cancel the timer, press the Delay 1-24hr pad
until the light on the Delay :l-24hr pad goes off.
4