Preparing To Installthe Air Conditioner - GE AG_07 Series Owner's Manual And Installation Instructions

Preparing to install the air conditioner.
Read these instructions completely and carefully.
Before You
NOTE TO INSTALLER:Leave these instructions with
the air conditioner after installation is completed.
NOTE TO CONSUMER:Keep this Owner's Manual
and Installation Instructions for future use.
IMPORTANT NOTES:
For personal safety, this air conditioner must be
properly grounded.
It is important to have the waft outlet and circu#
checked by a qualified electrician if there is any
doubt as to whether a proper ground exists.
Foflow National Electric Codes (NEC) and/or local
codes and ordinances.
CAUTION:
Do not, under any circumstances, cut or
remove the third (ground) prong from the
power cord.
Do not change the plug on the power cord
of this air conditioner.
Aluminum house wiring may present
special problems--consult a qualified
electrician.
ElectricalRequirements
Some models require l lS/120-voh ax.,
60 Hz grounded outlet protected _dth
a 15-amp time delay fi_se or dr_uit breaker.
Tile 3-prong grounding plug minimizes the
possibilfly of elecuic shock hazard. If the wzdl outlet
you plan/o use is only a 2-prong outlet, it is your
responsibility to have it replaced with a properly
grounded 3-prong wall outlet.
Some models require 230/208-voh a.c.,
prote(ted with a time delay fi_se or (ir(uit
breaker. These models should be installed
on their own single branch circuit for best
pedi)rmance and to prevent overh)ading
house or apmtment wiring circuits, which
could cause a possible fire hazard fiom
overheating wires.
ToolsYouWill Need
ii_: P hillips-head screw&iver
ii_: F lat-1)lade s(rewdriver
>_Ruler or tape measure
ii_:Scissors or knife
ii_:Pencil
>_ I,evel
8