GE JGP329 Owner's Manual page 10

Cleaning the glass cooktop surface,con some mode s;
Clean gour cooktap after
each spill. Use CERAMA
BRYTE ® Ceramic Cooktop
Cleaner.
Normal Dailg Use Cleaning
ONLYuse CERAMABRVTE ® Ceramic Cooktop
Cleaner on the glass cooktop. Other creams
may not be as effective.
To maintain and protect the surface of your
glass cooktop, follow these steps:
%
Before using the cooktop for the first time,
remove the burner grates and clean the
cooktop with CERAMA BRYTE ® Ceramic
Cooktop Cleaner. This helps protect the
top and makes cleanup easier.
[_] Daily use of CERAMA BRYTE ® Ceramic
Cooktop Cleaner will help keep the
cooktop looking new.
[] Shakethe cleaning cream well. Apply a
few drops of CERAMA BRYTE ® Ceramic
Cooktop Cleanerdirectly to the cooktop.
[] Use a paper towel or CERAMABRYTE ®
Cleaning Pad for Ceramic Cooktops to
clean the entire cooktop surface.
[] Use a dry cloth or paper towel to
remove all cleaning residue. No need to
rinse.
NOTE: It is verg important that gou DO NOT
heat the cooktop until it has been cleaned
thoroughlg.
Use a CERAMABRYTE ® Cleaning
Pad for Ceramic Cool<tops.
Burned-On Residue
WARNING: DAMAGE
ragout
g/ass surface may occur if gou use scrub
pods other than those recommended.
[-_ Allow the cooktop to cool.
EE
Remove the burner grates and spread a
few drops of CERAMA BRYTE ®Ceramic
Cooktop Cleaner on the entire burned
residue area.
@
Using the included CERAMA BRYTE ®
Cleaning Padfor Ceramic Cooktops, rub
the residue area, applying pressure as
needed.
@
If any residue remains, repeat the steps
listed above as needed.
For additional protection, after all
residue has been removed, polish the
entire surface with CERAMABRYTE ®
Ceramic Cooktop Cleaner and a paper
towel.
The CERAMABRYTE ® Ceramic
Cool<top .Scraper and all
recommended supplies are
available through our Parts Center.
.Seeinstructions under "To Order
Parts" section on next page.
NOTE:Do not use a dull or
nicked blade.
Heavg, Burned-On Residue
%
EE
Allow the cooktop to cool.
Remove the burner grates. Use a single-
edge razor blade scraper at
approximately a/45 ° angle against the
glass surface and scrape the soil. It will
be necessary to apply pressure to the
razor scraper in order to remove the
residue.
%
After scraping with the razor scraper,
spread a few drops of CERAMABRYTE ®
Ceramic Cooktop Cleaner on the entire
burned residue area. Use the CERAMA
BRYTE ® Cleaning Pad to remove any
remaining residue.
For additional protection, after all
residue has been removed, polish the
entire surface with CERAMABRYTE ®
Ceramic Cooktop Cleaner and a paper
towel.
10