Table of Contents
Advertisement
USE
QUESTIONS?
THIS PROBLEM SOLVER
PROBLEM
OVEN WILL
NOT WORK
OVEN LIGHT
DOES NOT WORK
FOOD DOES NOT
BROIL PROPERLY
FOOD DOES NOT
ROAST OR BAKE
PROPERLY
LOWER OVEN DOOR
WILL NOT LATCH
LOWER OVEN DOOR
WILL NOTUNLOCK
SURFACE UNITS
NOT FUNCTIONING
PROPERLY
OVEN WILL NOT
SELF-CLEAN
POSSIBLE
CAUSE
• Plug on cooking center is not completely inserted in the electrical outlet.
• The circuit breaker in your house has been tripped, or a fllse has been blown.
•Oven controls not properly set.
•Door left in locked position after cleaning.
•Light b_lb is k)o_e bur,ed out or defective.
Replace.
• Switch operating oven light is broken. Call for service.
•OVEN SET or t)V_iN TEMP knob not set at BROIL.
•Door not left open _.',; t he broil stop position as recommended.
•Improper shell" position being used. See the Broiling Guide.
•Necessal T preheating was not done.
•Food is being cooked on hot pan.
.Cookware
is not suited for broiling.
• Low voltage. See file Broiling section.
•Alumimm_ foil used on the broiler pan rack has not been fitted properly and sl it
as recommended.
•OVEN SET or OVEN TEMP knob not set on BAKE.
• Shelf position is incorrect, See the Baking and Roasting sections.
•Incorrect cookware or cookware of improper size is being used.
•The oven thermostat needs adjustment.
See the Adjust the Oven Thermostat ............
Do It Yourself section.
•The latch handle is not moved all the way to the right.
•The oven has not cooled to a sate temperature.
• Surface units are not plugged in solidly.
•Drip pans are not set securely in the cooktop.
• Surface unit controls are not properly set.
•Autonmtic timer dials not set or not set properly. Clock nmst be set to time of day
and the Stop Dial nmst be set and advanced beyond the time noted on oven clock.
•The Stop Dial was not advanced for long enough.
•Both OVEN SET and OVEN TEMP knobs must be set at CLEAN setting.
•When the oven is self-cleaned,
a thick pile of spil!over can leave a heavy
layer of ash and insulate that area fiom further heat. Wipe up heavy spillovers
before using the self-cleaning cycle.
•Latch not moved to the right.
32
Advertisement
Table of Contents
