Philips 24RF50S Quick Use And Setup Manual page 46

pclease make these simple
hecks be[bre callingjbr
serviee. These
tips can save
you
time and money since charges jbr
TV installation and adjustment of"
customer controls are not cov-
ered under your warranty.
No Power
No Picture
No Sound
Unusual Screen
Coloring
Remote Does Not
Work
TV Displays Wrong
Channel or No
Channels Above 13
CAUTION: A video source (such as a video game, Compact Disc Interactive - CDI, or
TV information channel) which shows a constant non-moving pattern on the TV screen,
can cause picture tube damage. When your TV is continuously used with such a source
the pattern of the non-moving portion of lhe game could leave an image permanently on
the picture tube. When not in use, lure the video source OFE Regularly alternate the
use of such video sources with normal TV viewing.
Check the TV power cord. Unplug lhe TV, wait 10 seconds, then reinsert plug into
outlet and push POWER button again. I
Check that outlet is not on a wall switch. Be sure fuse is not blown on AC Power strip. I
Check antenna connections. Are lhey properly secured to the TV's 75_ plug? |
Check the TUNER MODE control for CABLE or ANTENNA setting.
1
Check Audio/Video Input jack connections if using a VCR or olher external device.
Check the VOLUME buttons.
Check the MUTE button on the remote control.
Check Audio/Video Input jack connections if using a VCR or olher external device.
Turn lhe TV OFF for several seconds, then power the set back ON.
Unplug the TV for FIVE minutes. Plug lhe TV back into the AC outlet and power the
TV ON. This should correct the problem.
Check lhe Picture menu options for proper control settings.
Presslhe Auto Picture button on the remote to change the color options, if the color
resets itself, readjust the Piclure menu option control.
Check batteries. Replace with AA Heavy Duty (Zinc Chloride) or Alkaline batteries
if necessary.
Clean the remote and the remote sensor window on the TV.
Check the TV power cord. Unplug the TV, wait 10 seconds, then reinsert plug into
outlet and push POWER button again. Be sure fuse is not blown on AC Power slrip.
Check to be sure TV outlet is not on a wall switch.
Repeat channel selection.
Add desired channel numbers (CHANNEL control) into TV memory.
Check to be sure the TUNER MODE control is set to the CABLE option.
/
Cleaning and Care
• To avoid possible shock hazard be sure the TV is unplugged from the electrical outlet before cleaning.
• When cleaning the TV screen take care not to scratch or damage the screen surface (avoid wearing jewelry or using
anything abrasive). Wipe the front screen wilh a clean cloth dampened with water. Use even, easy, vertical slrokes when
cleaning.
• Gently wipe the cabinet surfaces with a clean cloth or sponge dampened in a solution of cool clear water. Use a clean
dry cloth to dry lhe wiped surfaces.
• Never use thinners, insecticide sprays, or olher chemicals on or near the cabinet, as they might cause permanent marring
of the cabinet finish.
4O