Advertisement
Quick Links
2009 LCD TV Software Update Procedure
IMPORTANT: The update files need to be downloaded and installed in the USB Drive before starting this process.
Read this
Step 1
With TV On, in an active
input or TV Mode, press and
release the MENU button on
the Remote Control
Step 2
Press the cursor down
button on the Remote Control
repeatedly until SETUP is
highlighted.
Step 3
Press and release the
SELECT button on the
Remote Control to enter the
SETUP menu.
Step 4
Cursor down to highlight
Reset AV & Setup. Current
software version should now
be displayed; please take note.
Important Note:
In case current version is not pre-
sent, please proceed to step No 5.
Models covered: L46S603 L55S603
Do this
1
See this
Advertisement
Related Manuals for Hitachi 2009 LCD TV
Summary of Contents for Hitachi 2009 LCD TV
- Page 1 2009 LCD TV Software Update Procedure IMPORTANT: The update files need to be downloaded and installed in the USB Drive before starting this process. Read this Do this See this Step 1 With TV On, in an active input or TV Mode, press and...
- Page 2 2009 LCD TV Software Update Procedure Read this Do this See this Step 5 Insert USB Drive into the TV’s USB Input. See page 3 for pictorial for USB Drive insertion. As soon as you insert the USB Drive; TV will display the current version in TV and the version in the USB Drive.
- Page 3 2009 LCD TV Software Update Procedure In our 2009 LCD TV models, there is an update USB input which is located on the upper left hand side of the unit, identified as “USB/SERVICE” and covered with a plastic lid. It is located next to HDMI input 5 on the side panel jack assembly.