CONTENTS SAFETY PRECAUTIONS ........2 ADJUSTING THE DIRECTION OF FEATURES AND FUNCTIONS ......3 AIR CIRCULATION ..........11 NAME OF PARTS ........... 4 SWING OPERATION ..........12 PREPARATION ............6 ENERGY SAVE OPERATION ....... 13 OPERATION ............7 MANUAL AUTO OPERATION ......13 TIMER OPERATION ..........
FEATURES AND FUNCTIONS AUTOMATIC OPERATION COOLING MODEL Merely press the START/STOP button, and the unit will begin automatic operation in the Cooling or Dry mode as appropriate, in accordance with the thermostat setting and the actual temperature of the room. HEAT &...
NAME OF PARTS Instructions relating to heating(*) are applicable only to “HEAT & COOL MODEL” (Reverse Cycle). Fig. 1 MANUAL AUTO SWING SWING TIMER OPERATION Fig. 2 Fig. 4 Electrical Breaker This breaker is installed during the electrical installation. Fig. 3 Fig.
Page 5
Fig. 1 Indoor Unit Fig. 5 Remote Control Unit 1 Operating Control Panel (Fig. 2) C SLEEP Button 2 MANUAL AUTO button D MASTER CONTROL Button 3 Remote Control Signal Receiver E SET TEMP./SET TIME Buttons ( 4 OPERATION Indicator Light (red) F Signal Transmitter 5 TIMER Indicator Light (green) G TIMER Button...
PREPARATION CAUTION! Load Batteries (R03/LR03/AAA 4) Take care to prevent infants from accidentally swallowing batteries. Press and slide the battery compartment lid to open it. When not using the remote control unit for an extended period, remove the batteries to avoid possible leakage and Insert batteries.
OPERATION Instructions relating to heating (*) are applicable only to “HEAT & COOL MODEL” (Reverse Cycle). To Select Mode Operation Press the START/STOP button. SLEEP TIMER The indoor unit’s OPERATION indicator light (red) will be on. The air conditioner will start operating. Press the MASTER CONTROL button to select the de- COOL sired mode.
Page 8
OPERATION Instructions relating to heating (*) are applicable only to “HEAT & COOL MODEL” (Reverse Cycle). About Mode Operation AUTO: COOLING MODEL When the room temperature is 4 F higher than the set temperature, the Cooling Operation mode will switch between Cooling and Drying.
TIMER OPERATION Instructions relating to heating (*) are applicable only to “HEAT & COOL MODEL” (Reverse Cycle). Before using the timer function, be sure that the remote control unit is set to the current time (See page 6). To Use the ON timer or OFF timer SLEEP TIMER Press the START/STOP button...
TIMER OPERATION About the PROGRAM timer About the ON timer The PROGRAM timer allows you to integrate OFF timer The timer function is designed to bring your room to a and ON timer operations in a single sequence. The se- comfortable temperature by the set time;...
ADJUSTING THE DIRECTION OF AIR CIRCULATION Instructions relating to heating (*) are applicable only to “HEAT & COOL MODEL” (Reverse Cycle). Vertical (up-down) direction of airflow is adjusted by pressing the remote control unit’s AIR FLOW DIRECTION VERTICAL SET button. Horizontal (right-left) direction of airflow is adjusted by pressing the remote control unit’s AIR FLOW DIRECTION HORIZONTAL SET button.
SWING OPERATION Begin air conditioner operation before performing this procedure To select Vertical airflow SWING Operation Press the AIR FLOW DIRECTION VERTICAL SWING button . SWING SWING The SWING indicator light (VERTICAL SWING) (orange) will turn on. In this mode, the UP/DOWN air direction flap will swing automatically to direct the TIME TEST ENERGY...
ENERGY SAVE OPERATION Instructions relating to heating (*) are applicable only to “HEAT & COOL MODEL” (Reverse Cycle). The air conditioner can be operated while keeping energy consumption costs down. How To Use the ENERGY SAVE OPERATION SWING SWING Press the START/STOP button (if the unit is already operating, proceed to step 2).
CLEANING AND CARE Before cleaning the air conditioner, be sure to turn it off and disconnect the power supply. CAUTION! Turn off the electrical breaker. Cleaning the Air Filter 3. Re-attach the air filters to the intake grille. 1. Pull the air filters upward to remove them. Remove the air filters by raising its handle while pulling The air filters fit onto the inside of the intake grille.
TROUBLESHOOTING Instructions relating to heating (*) are applicable only to “HEAT & COOL MODEL” (Reverse Cycle). In the event of a malfunction (burning smell, etc.), immediately stop operation, turn off the elec- WARNING! trical breaker, and consult authorized service personnel. Merely turning off the unit’s power switch will not completely disconnect the unit from the power source.
TROUBLESHOOTING Instructions relating to heating (*) are applicable only to “HEAT & COOL MODEL” (Reverse Cycle). Symptom Items to check See Page Is the power supply plug disconnected from its outlet? CHECK ONCE Doesn’t operate at all: MORE Has there been a power failure? —...
OPERATING TIPS AUTO Restart In Event of Power Interruption Should the power supply to the air conditioner be inter- Use of other electrical appliances (electric shaver, etc.) or rupted by a power failure, the air conditioner will restart nearby use of a wireless radio transmitter may cause the automatically in the previously selected mode once the air conditioner to malfunction.