Sanyo EM-S100 Service Manual Supplement
  1. Manuals
  2. Brands
  3. Sanyo Manuals
  4. Microwave Oven
  5. EM-S100
  6. Service manual supplement
Sanyo EM-S100 Service Manual Supplement

Sanyo EM-S100 Service Manual Supplement

Sanyo
Hide thumbs Also See for EM-S100:
Table of Contents

Advertisement

Quick Links

See also: Service Manual
SUPPLEMENT OF
SERVICE MANUAL
SERVICE MANUAL
PRECAUTIONS TO BE OBSERVED BEFORE AND DURING
SERVICING TO AVOID POSSIBLE EXPOSURE TO
PRECAUTIONS TO BE OBSERVED BEFORE AND DURING
(a) Do not operate or allow the oven to be operated with the door open.
(b) Make the following safety checks on all ovens to be serviced before activating the magnetron or other
(a)
Do not operate or allow the oven to be operated with the door open.
microwave source, and make repairs as necessary:
(1)Interlock operation, (2) proper door closing, (3) seal and sealing surfaces (arcing, wear, and other
(b)
Make the following safety checks on all ovens to be serviced before activating the magnetron or other microwave
damage), (4) damage to or loosening of hinges and latches, (5) evidence of dropping or abuse.
source, and make repairs as necessary:
(c) Before turning on microwave power for any service test or inspection within the microwave generating
(1) Interlock operation, (2) proper door closing, (3) seal and sealing surfaces (arcing, wear, and other damage),
compartments, check the magnetron, wave guide or transmission line, and cavity for proper alignment,
(4) damage to or loosening of hinges and latches, (5) evidence of dropping or abuse.
integrity, and connections.
(c)
Before turning on microwave power for any service test or inspection within the microwave generating compartments,
(d) Any defective or misadjusted components in the interlock, monitor, door seal, and microwave generation
check the magnetron, wave guide transmission line, and cavity for proper alignment, integrity, and connections.
and transmission systems shall be repaired, replaced, or adjusted by procedures described in this manual
(d)
Any defective or misadjusted components in the interlock, monitor, door seal, and microwave generation and transmis-
before the oven is released to the owner.
-sion systems shall be repaired, replaced, or adjusted by procedures described in this manual before the oven is
(e)(i) A microwave leakage check to verify compliance with the Federal performance standard should be
released to the owner.
performed on each oven prior to release to the owner. (For U.S.A)
(e)(ii) A microwave leakage check to verify compliance with the Canadian Regulation, HEALTH AND WELFARE,
(e)
A microwave leakage check to verify compliance with the Federal performance standard should be performed on each
(i)
SOR/79-920 should be performed on each oven prior to release to the owner. (For CANADA)
oven prior to release to the owner. For U.S.A.
(e)
A microwave leakage check to verify compliance with the Canadian Regulation, HEALTH AND WELFARE,
(ii)
SOR/79-920 should be performed on each oven prior to release to the owner. For CANADA

Microwave Oven

SERVICE MANUAL SUPPLEMENT
for Model EM-S100
Microwave Oven

WARNING TO SERVICE TECHNICIANS

WARNING TO SERVICE TECHNICIANS

EXCESSIVE MICROWAVE ENERGY

SERVICING TO AVOID POSSIBLE EXPOSURE TO
EXCESSIVE MICROWAVE ENERGY
Microwave Oven
See the Service Manual of EM-C180US(SM-640179)
except the items described in this Service Manual.
CAUTION
CAUTION
FORM # EM-S100 (02/05)
EM-C160US
File No:
PRODUCT CODE NO. 437-453-00
Product Code No:
REFERENCE NO.SM-640180
REFERENCE NO. SM - 860235
EM-S100
437 436 05

Advertisement

Table of Contents
loading

Related Manuals for Sanyo EM-S100

Summary of Contents for Sanyo EM-S100

  • Page 1: Microwave Oven

    A microwave leakage check to verify compliance with the Canadian Regulation, HEALTH AND WELFARE, (ii) REFERENCE NO.SM-640180 SOR/79-920 should be performed on each oven prior to release to the owner. For CANADA FORM # EM-S100 (02/05) REFERENCE NO. SM - 860235...

  • Page 4: Specifications

    2. SPECIFICATIONS 4. PRECAUTIONS AND REPAIR SERVICE TIPS PRELIMINARY Rated Power Consumption . . . 1600W SINCE NEARLY 2,000 VOLTS EXISTS IN SOME Microwave Output ..1000W CIRCUITS OF THIS MICROWAVE OVEN, REPAIRS Frequency .

  • Page 5: Circuit Diagram

    5. CIRCUIT DIAGRAM NOTE : All component have special characteristics for safety and must be replaced using parts listed in this manual. All service on M/W ovens should be performed by a qualified technician using approved testing equipment. Customers should not attempt replace component marked with a symbol.

  • Page 6: Test Procedures And Troubleshooting

    6. TEST PROCEDURES AND TROUBLESHOOTING...
  • Page 13 7. DISASSEMBLY INSTRUCTIONS...

  • Page 17: Exploded View And Parts List

    8. EXPLODED VIEW AND PARTS LIST CAVITY PARTS NOTE : All component have special characteristics for safety and must be replaced using parts listed in this manual. All service on M/W ovens should be performed by a qualified technician using approved testing equipment. symbol.
  • Page 18 SWITCHES AND MICROWAVE PARTS NOTE : All component have special characteristics for safety and must be replaced using parts listed in this manual. All service on M/W ovens should be performed by a qualified technician using approved testing equipment. Customers should not attempt replace component marked with a symbol.

  • Page 19: Door Parts

    DOOR PARTS NOTE : All component have special characteristics for safety and must be replaced using parts listed in this manual. All service on M/W ovens should be performed by a qualified technician using approved testing equipment. Customers should not attempt replace component marked with a symbol.

  • Page 20: Control Panel Parts

    CONTROL PANEL PARTS NOTE : All component have special characteristics for safety and must be replaced using parts listed in this manual. All service on M/W ovens should be performed by a qualified technician using approved testing equipment. Customers should attempt replace component...

  • Page 21: Control Circuit Board

    CONTROL CIRCUIT BOARD (Part No.617 206 7964)

  • Page 22: Overall Circuit Diagram

    9. OVERALL CIRCUIT DIAGRAM...

Table of Contents