Turning Camera On and Off
Press the Power button to turn the camera on. To turn off the
camera, press the Power button again
Power Button
After the camera is powered on, set the camera to Auto mode
by turning the Mode Dial at the top of the camera (see page
23).
Setting Language and Date/Time
The Date/Time and Language setup page will
automatically appear when the camera is turned on for
the first time.
To set the display language and date/time, go to the following
setup options in the General Setup menu.
• Language
• Date/Time
To access the General Setup menu, do the following:
1. Press the Power button to turn the camera on.
2. Press the
button, press Up/Down button to switch
func
menu
between menus, select General Setup Menu, press
button to enter Set Menu.
Set Display Language
1. In the General Setup Menu, press Up/Down button to
select Language, press
mode.
2. Use the Up/Down/Left/Right buttons to select the desired
language.
3. Press the
button to confirm the setting.
or Right button to enter setting
15