Page 1
OWNER’S MANUAL LE42H330 LE46H330 LE55H330 LD42K3 LED-LCD TELEVISION Please READ this manual carefully before operating your TV, and retain it for future reference.
Contents Contents Function Menu ...........18 Warning Function Menu Set ............18 Adjust Menu ............19 Important Safety Instructions Time Menu ............19 Introduction Lock Setup ............20 Panel Control ............6 How to use the password function ......20 Connection Option ..........7 Advanced function To watch a 3D TV ..........21 Remote Control...
Warning Warning WARNING RISK ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. * To avoid electric hazards, it is strongly suggested that the back cover not be opened, as there is no any accessory inside the casing.
- This is a simplified representation of front panel. - Here shown may be somewhat different from your TV. Panel Control LD42K3 LE42H330/LE46H330/LE55H330 Press this key to open/close signal source 1 TV/AV options menu. Press to adjust the volume. In the MENU screen, 2 VOL +/- these buttons serve as right/left buttons.
Page 7
Panel Control Remote Control Battery loading 1. Slide open the cover of the battery compartment on the back of the remote controller. 2. Load two 7# (AAA) alkaline batteries in the compartment, (plus and minus poles to respective mark) 3. Replace the cover of the battery compartment. Precautions Make sure that two AAA alkaline batteries are loaded.
Connection Options Connection Options Back panel connections LD42K3 LE42H330/LE46H330/LE55H330 Connect a video cable from a computer to this Connect cable pr antenna signal to the TV, either 8 ANT In PC Video In jack.. directly or through your cable box.
Remote Control Function Remote Control Function - The remote control cannot be operated unless the batteries are properly loaded. - When using the remote control, aim it at the remote control sensor on the TV. Function introduction Press this key to start TV from standby mode, press it again to return to standby 1 POWER mode.
External Equipment Connections External Equipment Connections Antenna Connection - Antenna or Cable Service without a Cable Box Connections. - For optimum picture quality, adjust antenna direction if needed. Note: * It is recommended that you'd better use 75 coaxial cable to remove the disturbance caused by airwave.
The following are examples of someways to connect your TV. How to connect Take LE42H330 as an example, Choose the connection which is best for you. • Connect the audio and video cables from the external equipment’s output jacks to the TV input...
External Equipment Connections AUDIO jacks on the TV’ as shown in the figure. Press Play button on external equipment for program play. How to use Turn on the DVD player, insert a DVD. Use the SOURCE button on the remote control,and PC Setup then press button to to select COMPONENT...
External Equipment Connections Note ❏ Component, PC, HDMI input sources cannot be used for Monitor out. ❏ When connecting with external audio equipments, such as amplifiers or speakers, please turn the TV speakers off. Power source TO USE AC POWER SOURCE Use the AC polarized line cord provided for operation on AC.
Basic Receiving and Playing Operations Basic Receiving and Choose the Input source Change the picture source so you can watch your TV, Playing Operations VCR, Cable , or any other devices that are connected to Playing Operations your TV. Press SOURCE button to enter the Input Source Switching ON/OFF the TV set menu and then use button to select the...
Basic Receiving and Playing Operations range of 2500K~15000K from warm color to cold color, afterwards press to adjust; if a different Back light Four_DIM benchmark is selected for adjustment, the original adjustment data will be automatically cleared. Back light Reset Contrast Brightness Color...
Basic Receiving and Playing Operations Press button to select the desired items, Return to factory default settings. press OK to enter its submenu. Channel menu Press button to adjust the setting. Volume Display channel menu by pressing SOURCE button then button to select the source of ATV or DTV Press to adjust the volume of TV set.
Basic Receiving and Playing Operations screen. Back light LED Four... Intelligent Mode Upgrade Color system All channels now available will be automatically preset in Press to select the Color Systems option, order .After the search has finished, the first program and then press to select correct color system.
Basic Receiving and Playing Operations MEMC Function Menu Press to set ON, Demo1,Demo2 or OFF, the moving picture will be better when MEMC is on function. Function Menu Set Press to select DEMO OFF, DEMO1,DEMO2, Press MENU on the remote control unit or MENU DEMO3.
Basic Receiving and Playing Operations Time Menu Net Upgrade Press to select OK or Cancel to upgrade the TV Press MENU button and then use button to set by internet and flash. select Time menu. Adjust Menu Press to select the desired option, press OK to enter its submenu.
Basic Receiving and Playing Operations cleared. Lock Set On channel: This function is used in combination with Change Password the On/Off Time function. When the TV turns on upon Tuning Lock reaching the On time, it automatically enters the preset Preset Source channel.
Basic Receiving and Playing Operations Source Lock To watch a 3D TV This function is used to prohibit watching a program from various external inputs, e.g. AV and PC, etc. Press to select a certain option, and then press OK to enter the submenu, press to set an external If the TV is currently in the 2D...
Basic Receiving and Playing Operations Streaming Media Playing System Note ❏ The diagrams in the following section are schematic and only for your reference. Please see Press to select the “Confirm” option, you will the actual product if necessary. enter the interface for selecting a corresponding 3D mode.
Basic Receiving and Playing Operations • The file code rate should be lower than 300KB/S; • Due to the limitation of USB signal transmission distance, it is recommended not to use USB patch cord, in case of using the cord, make sure that its length is not over 1m;...
Basic Receiving and Playing Operations To exit playing, just press BACK repeatedly. Press to change page, and press select the picture you want to play, and then press OK to enter the playing display interface. Note • Press ZOOM to magnify the picture, and then ❏...
Maintenance / Troubleshooting Note Maintenance ❏ The red button on the control can doing some delete. Text playback support TXT format. Maintenance Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have your new TV.
Note Power MODEL Net Size(LxWxH) ❏ Consumption Weight Production of the screen requires high and precision technologies. However, there might be some LE42H330 110W 1012x41x622mm 15.7Kg dank or bright (red, blue or green) spots, or some 130W 1107x55x733mm 18.2Kg LE46H330 anomalistic stripes or spots.
Format 480i/480p Note ❏ Design and specifications are subject to change 576i/576p without notice. The dimension in this manual is a 720p 50/60 approximation. 1080i/1080p 50/60 Format Recommendatory HDTV/ SDTV(YP b P r /YC b C r ) format Sequence Refresh Format Number...
Page 28
Specification 28 LED -LCD television Owner’s Manual...
Page 29
Format LED -LCD television Owner’s Manual...
Page 30
Specification 30 LED -LCD television Owner’s Manual...
Page 31
Format LED -LCD television Owner’s Manual...
Page 32
Specification Specification / Format 32 LED -LCD television Owner’s Manual...
Page 33
Format LED -LCD television Owner’s Manual...
Page 34
Specification 34 LED -LCD television Owner’s Manual...
Page 35
Format LED -LCD television Owner’s Manual...