Advanced Settings - Nokia 22 Operator's Manual

3 Confirm the new PIN by re-entering the code followed by #.
Adjusting telephone speaker volume
To adjust the telephone set's speaker volume, key in 0**x during the call, the x
representing a value between 1 (the lowest volume level) and 10 (the highest
volume level). The default value is 5.
Activating IOF
To activate the IOF (Intensity of Field) feature, key in 777**#. Placing the receiv-
er on the hook completes the function.

Advanced settings

The more advanced settings can be modified when the Nokia 22 is in configu-
ration mode.
The following settings are available in configuration mode:
• Loop interruption time in milliseconds
• Polarity reversal time in milliseconds
• CLI mode
• Network selection
• PBX application module extension mode change
• Terminal restart
Activating configuration mode
To activate configuration mode, key in **####**.
The configuration mode is protected with a four-digit access code. When con-
figuration mode has been activated, the Nokia 22 requires an access code for
changing the settings. The default code is 1234. To change the default access
code, use the Nokia 22 Configurator Software.
To enter the access code, key in AccessCode#.
Note: After changing the configuration mode values the Nokia 22 must
be restarted in order to save the new settings. Restart the terminal in
the configuration mode by keying in 555**#.
©2001 Nokia Mobile Phones. All rights reserved.
Configuration
31