Page 1
SD-AT1000W(LAG) TINSEA121AWZZ ENGLISH Please refer to pages E-1 to E-32. ESPAÑOL Consulte las páginas S-1 a S-32. 1-BIT DIGITAL HOME THEATER SISTEMA 1-BIT PARA HOME THEATER MODEL MODELO SD-AT1000W OPERATION MANUAL MANUAL DE MANEJO SD-AT1000W_LAG_FRONT TINSZA121AWZZ...
ENGLISH SD-AT1000W ENGLISH Introduction Contents Thank you for purchasing this SHARP product. To obtain the best performance from Page " General Information this product, please read this manual carefully. It will guide you in operating your SHARP product. Accessories ............2 ! SD-AT1000W 1-Bit Digital Home Theater consisting of SD-AT1000W (main unit), Precautions .
15m (45 feet) approx. 15m (45 feet) other types of accident, causing damage. SHARP will not be held responsible for any damage resulting from the use of this unit with a voltage other than that specified. Speaker connection lead 6 "...
Controls and indicators SD-AT1000W ENGLISH " Main unit (front panel) (3) (4) (6) (7) (9) (10)(11) (12) (13) 10 11 Reference page Reference page 1. Sleep Indicator ......... 29 6.
Page 5
SD-AT1000W ENGLISH " Main unit (rear panel) The rating label is located on the bottom of the unit. Reference page Cooling fan 1. FM 75 Ohms Aerial Socket ....... . 10 This unit is fitted with a cooling fan at the rear for improved cooling.
Controls and indicators (continued) SD-AT1000W ENGLISH " Remote control Reference page 1. Remote Control Transmitter .......16 2.
Page 7
SD-AT1000W ENGLISH It is possible to operate some functions of Sharp TVs, VCRs and DVD players with your new SD-AT1000W remote control. However some models may not respond. TV Operation Buttons DVD Operation Buttons 1 TV ON/STAND-BY 4 TV CHANNEL Sets the TV power to "ON"...
Page 8
Controls and indicators (continued) SD-AT1000W ENGLISH " Front speaker 2 " Surround speaker 2 1. Bass Reflex Duct 1. Bass Reflex Duct 2. Speakers 2. Speaker 3. Speaker Terminals 3. Speaker Terminals 4. Mounting Holes for Stand or Bracket 4. Mounting Holes for Stand or Bracket "...
Page 9
SD-AT1000W ENGLISH " Speaker functions " Using antislip speaker cushions You can install the front, centre or surround speakers either vertically or horizontally. Front speaker: Affix the cushions (supplied) to the bottom of the speakers to prevent them from slid- Reproduces left and right sound (for the stereo mode) or front surround sound.
Speaker connection SD-AT1000W ENGLISH The speaker terminals on the main unit, the tube and plugs of the speaker lead, and speaker labels are distinguished by colours. Connect the speaker and the unit by matching the colours. (For speaker installation, refer to page 15.)
Caution: When using an external AM aerial, be sure to keep the wire of the AM loop aerial ! The supplied speakers are exclusively for SD-AT1000W. Do not connect connected. them to other equipment, and do not connect other speakers to SD- AT1000W.
Audio connections to DVD players, VCRs, TVs, etc. SD-AT1000W ENGLISH " Connecting a DVD player (CD player), digi- " Connecting a VCR, etc. tal tuner, etc. Digital audio cable Audio cable (commercially To coaxial digital (commercially available) audio input socket...
SD-AT1000W ENGLISH " Audio connection to TVs or other equip- " Using other subwoofer ment For a greater emphasis of bass, a commercially available subwoofer, with a built in amplifier, can be connected to the unit using the SUBWOOFER PRE You can enjoy surround sound from TVs or other equipment by connecting OUT socket.
Connecting the AC power lead SD-AT1000W ENGLISH " To turn the power on After checking all the connections have been made correctly, plug the AC power lead of this unit into the wall socket. Wall socket (AC 220 - 240 V, 50/60 Hz) Press the ON/STAND-BY button.
Setting the AM/FM interval SD-AT1000W ENGLISH The International Telecommunication Union (ITU) has established that member coun- tries should maintain either a 10 kHz or 9 kHz interval between broadcasting frequen- cies of AM stations and 100 kHz or 50 kHz for FM stations. The illustration shows the 50/9 kHz zones (regions 1 and 3), and the 100/10 kHz zone (region 2).
System installation SD-AT1000W ENGLISH " Placing the speaker system Notes: ! Place the TV halfway between the front speakers. The best surround effect will be achieved by placing each speaker at the same ! It is recommended that the centre speaker be placed near the television.
Remote control SD-AT1000W ENGLISH " Battery installation " Test of the remote control Check the remote control after checking all the connections (see pages 9 - 13). 1 Open the battery cover. Point the remote control directly at the remote sensor on the unit.
General control SD-AT1000W ENGLISH " To change the display brightness (2 levels) You can switch the display brightness by press- ing the DIMMER button. Display Dimmed " Volume control Main unit operation: When the VOLUME control is turned clockwise, the volume will increase. When it is turned anti- clockwise, the volume will decrease.
SD-AT1000W(LAG) TINSZA121AWZZ Setting the clock SD-AT1000W ENGLISH By setting the unit to the correct time, you can use it not only as a clock but also for Press the button to adjust the timer playback. hour and then press the ENTER but- ton.
Listening to the radio SD-AT1000W ENGLISH " Manual or Auto tuning Press the ON/STAND-BY button to turn the power on. Press the TUNER (BAND) button repeatedly to select the desired frequency band. FM monaural FM stereo Press the TUNING ( or ) button to tune in to the desired station.
Page 21
SD-AT1000W ENGLISH " Memorising a station " To recall a memorised station You can store 40 AM and FM stations in memory and recall them at the push of a but- Press the TUNER (BAND) button. ton. (Preset tuning) Press the TUNER PRESET ( or ) button to select the desired sta- Perform steps 1 - 3 in "Manual or Auto tuning"...
Listening to the playback sound from DVD players, VCRs, etc. SD-AT1000W ENGLISH Turn on the connected equipment. Press the ON/STAND-BY button to turn the power on. Select the source by pressing the DIGITAL or LINE button repeat- edly. DIGITAL 1...
Enjoying various sounds SD-AT1000W ENGLISH DTS (Digital Theater Systems) Dolby Digital Dolby Pro Logic Inputs from stereo-recorded discs, video tapes, etc. Digital input from discs with this trademark Digital input from discs with this trademark When playing stereo discs/videos or 2-channel stereo sounds recorded in Dolby Digital, the Dolby Pro Logic One of the digital audio systems for theatrical use.
Page 24
Enjoying various sounds (continued) SD-AT1000W ENGLISH " Listening to sounds with multi-channel (5.1 ch, etc.) When connecting the DVD player to the DIGITAL IN 1/2 sockets, you can enjoy Dolby Digital or DTS sounds with spacious effects. You can also enjoy spacious effects when listening to 2-channel stereo sounds using Dolby Pro Logic .
Page 25
SD-AT1000W ENGLISH " Listening to 2-channel stereo sounds Notes: ! If "STEREO" or "SURROUND" is selected, the " " indicator goes out. Whilst the disc is playing, press the STEREO button. ! Some discs are recorded at 96 kHz of sampling frequency. When this type of disc You can enjoy the great acoustic effects of is played, the sound mode is changed to "STEREO"...
Adjusting speaker delay/speaker level SD-AT1000W ENGLISH When speakers cannot be placed at equal distances, change speaker settings to Step 1. Speaker delay setting enjoy surround effects as if they were equally placed. By adjusting speaker delay, differences in speaker distance can be corrected. This...
Page 27
SD-AT1000W(LAG) TINSZA121AWZZ SD-AT1000W ENGLISH Step 2. Speaker level setting Step 3. Test tone If sounds from the speakers are uneven, you can equalise them by adjusting the After adjustments, check the speaker sound by listening to the test tone. (You can speaker levels.
Timer and sleep operation SD-AT1000W ENGLISH " Setting the timer You can use the unit as an alarm clock by setting the timer. Before setting timer: Turn the power on and press the TIMER but- Set the unit to the correct time (page 18).
Page 29
SD-AT1000W ENGLISH To check the timer setting: After completing the setting 1 Whilst in the timer playback stand-by mode, press the TIMER button. When the timer setting is completed: The unit is in the timer playback 2 Within 10 seconds, press the button to select "TIMER CALL", and...
Page 30
Timer and sleep operation (continued) SD-AT1000W ENGLISH " Setting the sleep timer To confirm the remaining sleep time: Whilst "SLEEP" is indicated, press the TIMER button. You can set the unit to the power stand-by mode at the specified time.
If something is wrong with this product, check the following before calling your autho- Symptom Possible cause Reference rised SHARP dealer or service centre. page ! Is the unit placed near the TV or " General The radio makes unusual P.
Error indicators and warnings Troubleshooting chart (continued) SD-AT1000W ENGLISH When you fail to perform operations properly, the following messages are displayed ! If trouble occurs on the unit. When this product is subjected to strong external interference (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is...
Specifications SD-AT1000W ENGLISH ! Front speaker As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The Type Full range speaker system (magnetic shield) performance specification figures indicated are nominal values of production units.