Table of Contents
Advertisement
DK-AP7N(R)
DK-AP7N(S)
Troubleshooting chart
DK-AP7N(W)
ENGLISH
Many potential problems can be resolved by the owner without
calling a service technician.
If something is wrong with this product, check the following
before calling your authorised SHARP dealer or service centre.
■ General
Symptom
●
When a button is
pressed, the unit does
not respond.
●
No sound is heard.
■ iPod
Symptom
●
No sound is produced.
No image appears on the
TV/monitor.
●
iPod will not charge.
E-11
Possible cause
●
Set the unit to the power
stand-by mode and then
turn it back on.
●
Is the volume level set to
minimum?
Possible cause
●
The iPod is not playing.
●
The iPod is not properly
connected to the unit.
●
Is the AC/DC adaptor of the
unit plugged in?
●
The video cable is not
properly connected.
●
The TV/monitor's input
selection is not properly set.
●
The iPod is not making full
contact with the iPod
connector.
●
The main unit is using
batteries as power supply.
rd
●
Using 3
generation iPod.
■ Condensation
Sudden temperature changes, storage or operation in an
extremely humid environment may cause condensation inside
the cabinet.
Condensation can cause the unit to malfunction. If this happens,
leave the power on until normal playback is possible (about 1
hour) before operating the unit.
■ If problem occurs
When this product is subjected to strong external interference
(mechanical shock, excessive static electricity, abnormal supply
voltage due to lightning, etc.) or if it is operated incorrectly, it may
malfunction.
If such a problem occurs, do the following:
1
Set the unit to the stand-by mode and turn the power on
again.
2
If the unit is not restored in the previous operation, unplug
and plug in the unit, and then turn the power on.
■ Before transporting the unit
Undock the iPod and close the unit. The unit will automatically
enter stand-by mode.
CAUTION: Carrying the unit with iPod docked might damage
both the system and the iPod.
Advertisement
Table of Contents
