KEY OPERATOR'S GUIDE DIGITAL LASER COPIER/PRINTER DIGITAL MULTIFUNCTIONAL SYSTEM This manual describes programs for use by the key operator. The key operator should read this manual thoroughly to gain the maximum value from these programs provide. Page • PURPOSE OF THE KEY OPERATOR PROGRAMS •...
Contents page G PURPOSE OF THE KEY OPERATOR PROGRAMS ................1 G KEY OPERATOR PROGRAM LIST.....................3 G USING THE KEY OPERATOR PROGRAMS ..................4 G GENERAL PROGRAMS ........................7 G PROGRAMS FOR COPY MODE .......................14 G DOCUMENT FILING PROGRAMS ....................16 PURPOSE OF THE KEY OPERATOR PROGRAMS The key operator programs are used by the administrator of the machine to enable or disable functions to suit the needs of your workplace.
PURPOSE OF THE KEY OPERATOR PROGRAMS Programs for the document filing function These programs are used to change the factory default settings for the document function to settings that better suit the needs of your workplace. When auditing mode is enabled for the document filing function, G An account number must be entered to print an image that was scan-saved.
KEY OPERATOR PROGRAM LIST Programs for general use of the machine, the copy function, and the document filing function are shown in the following list. The key operator code must be entered in order to use these programs. NOTE The key operator programs that can be accessed depend on the optional equipment that is installed. G General Programs Product key PS3 expansion kit...
USING THE KEY OPERATOR PROGRAMS The procedure for configuring the key operator programs is explained below using the "Key operator code change" program as an example. Follow the same steps to configure the programs that are explained beginning on page 7. Press the [CUSTOM SETTINGS] key.
Page 7
USING THE KEY OPERATOR PROGRAMS Supplementary explanation of key operation for key operator programs These keys and indicator are available on setting screens that require the entry of numerical values. KEY OPERATOR PROGRAMS (1 999) DEVICE CONTROL DISABLING OF DOCUMENT ORIGINAL SIZE DETECTOR SETTING FEEDER DISABLING OF LARGE...
Page 8
USING THE KEY OPERATOR PROGRAMS Key operator program menu The key operator programs are arranged in the following menu. Refer to this menu when enabling or disabling the settings that are explained beginning on the following page. * Some programs contain an additional level of settings (setting screen). Level 1 Level 2 AUDITING MODE...
GENERAL PROGRAMS Key operator programs for general use of the machine are explained in this section. Account control "Account control" consists of the following programs. Total pages per account G Auditing mode This program is used to display or print the total number G Total pages per account of prints of each account.
GENERAL PROGRAMS G Limiting the number of copies of all accounts Resetting account Touch the [ALL ACCOUNTS] key. [ALL] appears in This program is used to reset the print count and the account number entry screen. transmitted page count of an account to "0". The limits for all accounts are entered in the same way as the limits for the individual accounts.
GENERAL PROGRAMS Job log control Auto power shut-off If the machine is not used for a set duration of time, Clear all job log data auto power shut-off activates to enable maximum The machine keeps a log of the jobs it has run. The job conservation of energy.
GENERAL PROGRAMS Operation settings Disabling of job priority operation This program is used to prohibit use of the [PRIORITY] The "Operation settings" are related to basic operation key in the job status screen. of the machine and consist of the following programs: G Keys touch sound Message time setting G Auto clear setting...
GENERAL PROGRAMS Disabling of clock adjustment If "CANCEL DETECTION AT DOCUMENT GLASS" is set, originals will be regarded as EXTRA for all copier This program is used to prohibit changes to the clock functions and no original size will be displayed. adjust setting.
GENERAL PROGRAMS Saddle stitch position adjust Rotated output This program is used to adjust the stapling position When Rotated output is turned on, you can have the (folding position) when using the saddle stitch function paper output orientation (A4-size paper only) of each of the optional saddle stitch finisher.
GENERAL PROGRAMS Key operator code change Initialize and/or store settings This program is used to change the key operator code These programs are used to return the key operator that must be entered to configure the key operator programs to the factory default settings, to store the programs.
PROGRAMS FOR COPY MODE This chapter explains the key operator programs that are used for copy mode. Copy settings "Copy settings" consists of the following programs: Rotation copy setting G Initial status settings If this program is set, the image of originals will rotate G Exposure adjustment when the orientation of the originals does not match G Rotation copy setting...
PROGRAMS FOR COPY MODE Initial tab copy setting This program is used to set the initial image shift width (tab width) for tab copying. The width can be set from 0 mm to 20 mm (0" to 5/8") in increments of 1 mm (1/8"). Tab width Setting a maximum number of copies This program is used to set the maximum number of...
DOCUMENT FILING PROGRAMS This section explains key operator programs for the document filing function. Document filing settings "Document filing settings" consists of the following Document output options programs: This program is used to select the operations (print and G Default mode settings send) that are allowed for stored files.
Page 20
KEY OPERATOR'S GUIDE PRINTED IN JAPAN 2004A DSC2 CINSE2499FC51...