Mitsubishi Electric NM-VS100 Installation And Operation Manual page 34

RTSP/RTP settings
Perform a multicast setting to send a video and audio to multiple users.
(Up to 10 users)
RTP destination IP
Disable Multicast: Do no use the multicast.
Enable Multicast: Use the multicast.
-Multicast destination IP: Enter an IP between 224.0.0.0 and 239.255.255.255.
-RTP port: Enter a value between 1024 and 65532.
-RTP TTL: Enter a value between 1 and 255. If a network status is smooth, enter a
lower value. On the other hand, if a network status is poor, enter a
higher value. When there are many Video Servers or users, a higher
value may cause a heavy load to the network. For a detailed setting,
please consult with a network manager.
Language
▪Language
It will be able to select a user language. The type of language it will be able to
select is the English, the French, the German, the Spanish and the Italian.
Although it is empty, an IP will be entered automatically.
- 28 -