Acer WLAN 11g Broadband Router User Manual page 67

5.11.1.2. Enter the following static route information:
Parameter
Destinati
on LAN
IP
Subnet
Mask
Gateway
Hop
Interface
5.11.1.3. Click <<Add.
The new static route appears in the static routing list.
5.11.2. To Delete a Static Route:
5.11.2.1. On the Static Routing page, for any static route that you want to delete,
review the relevant information, seen in FIGURE 5 – 15.
5.11.2.2. Click Delete.
Description
Specifies the network address of the remote LAN
segment. For standard class "C" LANs, the
network address is the first 3 fields of this
Destination LAN IP, the 4th field can be left at 0.
Specifies the Subnet Mask used on the remote LAN
segment. For class "C" networks, the standard
Network Mask is 255.255.255.0.
Specifies the IP Address of the router on the local
LAN segment to which this device is attached.
Note that it is NOT the router on the remote LAN
segment.
Specifies the number of routers that must be
traversed to reach the remote LAN segment. Valid
values are 1 to 16.
Specifies the interface through which the router
goes to the next hop or a particular network.
Available options are WAN, LAN and DMZ.