Table of Contents
Advertisement
1 Introduction
DX-PC55E/DX-PC55U is application software to replay video data recorded by Mitsubishi's digital recorder on
Windows 2000 or Windows XP.
In combination with DX-TL5000E/DX-TL5000U series, DX-TL4516E/DX-TL4516U, DX-TL4509E/DX-TL4509U,
DX-TL2500E/DX-TL2500U, DX-TL950E, DX-TL910U, or DX-NT400E series digital recorder, you can set and
operate the recorder and load recorded images and the latest live image from the recorder using the network
function.
1.1
Features
• Simultaneous playback during recording, loading of the latest live image, section download
• Time search, alarm list display/search
• Simultaneous monitoring of several recorders, screen layout saving function
• Remote control and remote setting of the digital recorder
• PTZ camera control
• Alarm notification receiving function
• Playback of data recorded in the "FSM1," "FSM2," or "FSM3" format, playback of data copied on other media (to
the extent supported by Windows Explorer)
• Playback of data recorded in the FSMS format on SCSI copy media
• Printing by a Windows-supported printer
• Bookmark function, A-B section repeat playback function
• Audio replay function (available in certain conditions)
• Collective conversion into general image formats (such as JPEG and AVI)
1.2
System requirements
• IBM PC/AT-compatible with Intel Pentium processor or Intel Celeron processor 1 GHz or faster (2 GHz or faster
is recommended.)
• Windows 2000 or Windows XP
• 256 MB or more physical memory (512 MB or more is recommended.)
• At least 1024 pixels x 768 lines of resolution
• At least 24-bit color video adaptor and monitor (With lower bit color video adaptor and monitor, image display
may be subjected to restrictions.)
• At least 200 MB of free hard disk space for installation
• Free hard disk space for the swap depending on the swap size for collective conversion
• Preinstalled DirectX 8.0 or later
• Windows-supported sound adaptor, such as SoundBlaster
• SCSI adaptor supporting WinASPI32 and SCSI-2 such as Adaptec AHA-2940 Series and SlimSCSI (Necessary
only when using SCSI-connected devices.)
WinASPI should be installed in advance. For installation of WinASPI, see the operation manual of Adaptec
SCSI board.
• NIC that operates correctly under the condition satisfying the above-mentioned requirements (Necessary when
the network function is used.)
Notice
• Operation of this software is not always guaranteed in any environment that satisfies the above-mentioned
system requirements.
1.3
Connectable/compatibility-guaranteed devices (for playback of SCSI
media)
Connectable devices
•
MO disk drive (SCSI-2) ........ Fujitsu MO drive MCD3130SS, MCE3064SS, MCE3130SS
•
DDS-2 drive (SCSI-2) .......... Hewlett Packard DDS-2 drive
•
DDS-3 drive (SCSI-2) .......... Hewlett Packard DDS-3 drive
•
DVD-RAM drive (SCSI-2) .... Matsushita DVD-RAM drive LF-D102JD, LF-D200JD
Notice
• HDD playback isn't supported.
Compatibility-guaranteed devices
– 5 –
Advertisement
Table of Contents
