Operation Log - Mitsubishi Electric DX-NV100E Installation And Operation Manual

<Error log> (continued)
LOG display
LOG number example in the
client software
5200 LOG5200
5201 LOG5201
5300 LOG5300
8000 LOG8000
8501 LOG8501
<Operation log>
LOG display
LOG number example in the
client software
0001 P-LOSS
0002 P-RETURN
0110 REC OFF
0111 REC ON
0112 REC COM OFF
0113 REC COM ON
0501 SYS RST
0590 WNG RESET
0900 FW VER.UP
Cause
• The recorder is used in a high
temperature environment.
• The recorder is used in a high
temperature environment.
• The fan stops.
• An error occurs in LAN LINK.
• Recording stops temporarily because the
received data size becomes too large.
Operation
Power failure occurs during operation.
Power failure is recovered.
Normal recording stops.
Normal recording starts.
Normal recording stops via communucation.
Normal recording starts via communucation.
RESET button on the rear panel is pressed.
The call-out output is stopped.
Main fi rmware is updated.
Remedy
• Turn off the power and install the
recorder in an environment of 5 to 40
°C.
• Contact your dealer.
• If the fan stops, turn off the power
and contact your dealer immediately.
• Check the LAN connection.
-
Call-out
Alert
signal
level*1
output
Output Minor
Output Major
Output Major
Does not Minor
output
Does not Minor
output
21