Mitsubishi Electric DIS900D Operation Manual page 27

When LCD is on B/W mode, the following items are displayed.
Y Adjusts the yellow color of print image.
M Adjusts the magenta color of print image.
C Adjusts the cyan color of print image.
• On B/W mode, test print is not available.
Adjusts the sharpness of the image.
SOFT Softens the image sharpness.
NORMAL Does not adjust the sharpness.
HARD Reinforces the sharpness.
USER Adjusts the sharpness voluntarily.
Coef Sets the strength of sharpness.
Offs Sets offset value. When the value is increased, the
sharpness is reinforced.
Adjusts the image quality on the LCD.
COL. Sets color depth of the LCD.
BRIGHT Sets brightness of the LCD.
Selects the conditions for taking pictures and adjusts brightness.
FLASH Selects whether flash is available or not.
ON Triggers the flash when taking a picture.
OFF Does not trigger the flash.
EXP. Adjusts the light intensity from strobe flashing to image
capturing.
CENTER Sets the initial center value of the conditions for taking
pictures.
When FLASH is set to OFF, the following items are displayed.
ST. Selects shutter speed.
IRIS Selects iris setting.
SHARP
LCD
CAPTURE
27