7. Remove the tape, and advance the roll as indicated by the arrow. Set the end of the paper about 5mm beyond
the roller. When doing this, insert the paper straight along the seal. If it isn't inserted straight, the paper will
be crooked, which could cause white line on the edges of the print, ribbon wrinkles, and register slippage.
As seen from above
○
8. Set the paper cassette into the printer.
Se Sett t i t n i g ng U U p p th t e he Pr Prin inte t r e r
Setting Up the Printer
Setting Up the Printer
Path of the paper
×
13