Yamaha DME64N Owner's Manual page 445

Effect Type Parameter
M.Band Dyna. Low Gain
Two input, two
Mid Gain
output 3-band
dynamics Hi. Gain
processor, with
Presence
individual solo and
gain reduction
metering for each
band.
Cmp.Thre
Cmp.Rat
Cmp.Atk
Cmp.Rel
Cmp.Knee
Lookup
Cmp.Byp
L-M XOver
M-H XOver
Slope
Ceiling
Exp.Thre
Exp.Rat
Exp.Rel
Exp.Byp
Lim.Thre
Lim.Atk
Lim.Rel
Lim.Byp
Lim.Knee
Low
Mid
High
Setting Range
-96.0 to +12.0 dB
-96.0 to +12.0 dB
-96.0 to +12.0 dB
-10 to +10
-24.0 dB to 0.0 dB
1:1 to 20:1
0 to 120 ms
44.1kHz: 6.0ms to 46.0s
48kHz: 5.0ms to 42.3s
88.2kHz: 3ms to 23.0s
96kHz: 3ms to 21.1s
0 to 5
0.0 to 100.0 ms
ON/OFF
21.2 Hz to 8.00 kHz
21.2 Hz to 8.00 kHz
-6 dB, -12 dB
-6.0 dB to 0.0 dB, OFF
-54.0 dB to -24.0 dB
1:1 to :1
44.1kHz: 6.0ms to 46.0s
48kHz: 5.0ms to 42.3s
88.2kHz: 3ms to 23.0s
96kHz: 3ms to 21.1s
ON/OFF
-12.0 dB to 0.0 dB
0 to 120 ms
44.1kHz: 6.0ms to 46.0s
48kHz: 5.0ms to 42.3s
88.2kHz: 3ms to 23.0s
96kHz: 3ms to 21.1s
ON/OFF
0 to 5
ON/OFF
ON/OFF
ON/OFF
Chapter 6 Component Guide
Function
Low band level
Mid band level
High band level
For positive values, the threshold of the high band is
lowered and the threshold of the low band is
increased. For negative values, the opposite will
occur. When set to 0, all three bands are affected
the same.
Compressor threshold
Compressor ratio
Compressor attack
Compressor release time
Compressor knee
Lookup delay
Compressor bypass
Low/mid crossover frequency
Mid/high crossover frequency
Filter slope
Specifies the maximum output level
Expander threshold
Expander ratio
Expander release time
Expander bypass
Limiter threshold
Limiter attack
Limiter release time
Limiter bypass
Limiter knee
Low band solo
Mid band solo
High band solo
DME Designer Owner's Manual 445