Miele KF 7500 SNE ed-3 Operating And Installation Instruction page 31

Never use cleaning agents
containing abrasive substances
such as sand, soda, acids or
chemical solvents. "Non-abrasive"
cleaning agents are also unsuitable
as they can cause matt areas to
appear.
For stainless steel surfaces, use a
proprietary stainless steel cleaning
agent.
Do not let water get into the
electronic unit, ventilation grilles or
into the light.
Do not let water get into the
drainage channel and drain hole
when cleaning.
Do not use steam cleaning
apparatus to clean the appliance.
Pressurised steam could reach the
electrical components and cause a
short circuit.
The data plate located inside the
appliance must not be removed. It
contains information which is
required in the event of a service
call.
^ Switch the appliance off by pressing
both On/Off switches, switch off at
the socket and remove the plug.
^ Take any food out of the appliance
and store it in a cool place.
^ Take out any removable parts e.g.
shelves for cleaning.
Use warm water with a little washing up
liquid. Accessories, shelves and
drawers should be hand washed only.
Do not wash in a dishwasher.
^ Clean the appliance at least once a
month.
^ Clean the condensate channel and
drain hole in the StayFresh zone
frequently, so that condensate can
drain away unhindered. Use a straw
or similar to clear the drain if
necessary.
^ Clean stainless steel surfaces with a
suitable cleaning agent.
^ After cleaning, wipe the outer casing,
the interior and accessories with a
damp cloth and dry with a soft cloth.
Leave the doors open to air the
appliance for a short while.
^ A microfibre "E-Cloth" is available
from the Miele UK Spare Parts
Department, Part Number 980 13530,
which is suitable for cleaning
surfaces such as stainless steel,
glass, plastic and chrome without the
use of chemicals.
If you are unsure about a particular
product or need further advice
please contact your nearest Miele
Sales office. See back page for
address.
31