Control Unit; Electrical Connection - Miele DA 226-2 Operating And Installation Manual

Connect the canopy connection
cable to the corresponding coup-
lings on the left and right of the
motor unit or control unit.
Do this by connecting the four pole
plug into the rear connection and the
three pole plug into the front connec-
tion of the coupling on the left of the
motor unit or control unit.
Connect the six pole plug into the coup-
ling on the right of the motor unit or

control unit.

Secure the cable in the cable
clamps shown.
For appliances connected to an ex-
ternal fan, model designation...EXT:
Connect the control unit and the ex-
ternal fan with the connection cable
and the six pole plug.
Connect the appliance to the mains
via a fused spur or fused socket as
appropriate.
Before connecting the appliance
read the safety notes in "Warning
and Safety Instructions" and in the
"Electrical connection" section.
29