Nokia N81 User Manual page 109

To be able to make a video call, you must have a USIM
card and be in the coverage of a UMTS network. For
availability of and subscription to video call services,
contact your network service provider.
A video call can only be made between two parties.
The video call can be made to a compatible mobile device
or an ISDN client. Video calls cannot be made while
another voice, video, or data call is active.
Icons:
You are not receiving video (the recipient is not
sending video or the network is not transmitting it).
You have denied video sending from your device.
Even if you denied video sending during a video call, the
call is still charged as a video call. Check the pricing with
your service provider.
1
To start a video call, enter the phone number in the
standby mode, or select
2 Select Options
The secondary camera on the front is used by default for
video calls. Starting a video call may take a while.
Waiting for video image
If the call is not successful (for example, video calls are
not supported by the network, or the receiving device is
not compatible), you are asked if you want to try a normal
call or send a text or multimedia message instead.
98
Contacts and a contact.
> Call > Video call.
is shown.
Copyright © 2007 Nokia. All rights reserved.
The video call is active when you see two video images, and
hear the sound through the loudspeaker.
The call recipient may deny video sending (
case you only hear the sound and may see a still image or
a grey background graphic.
To change between showing video or hearing only sound,
select Options > Enable or
Sending audio, or Sending aud. &
To zoom in or out your own image, press
To switch the places of the sent video images on the
display, select Options > Change image
To route the audio to a compatible headset with Bluetooth
connectivity attached to your device, select
Activate handsfree. To route the audio back to the
loudspeaker of your device, select
handset.
To adjust the volume during a video call, use the volume
key on the side of the device.
To use the main camera for sending video, select
Options > Use main camera. To switch back to the
secondary camera, select Options
camera.
To end the video call, press the end key.
), in which
Disable > Sending video,
video.
or .
order.
Options >
Options > Activate
> Use secondary