Directory Number (Dn); Programming; Conditions - Panasonic KX-T336 Installation Instructions Manual

2.00

Directory Number (DN)

Description
Directory numbers are the software type logical
numbers which are programmed to match the
hardware type physical numbers (port numbers)
attached to ports of extensions.
Accordingly, directory numbers are extension
numbers.
Directory numbers are assigned in
DN Assignment" to be three or four digits.
Only numeric characters "0 to 9" can be used as a
Directory Number.
Directory number setting follows the setting in
"System-Numbering Plan", 1 st Hundred Block
Extension through 16th Hundred Block Extension.

Programming

System Programming
"Configuration-ON Assignment"
"System-Numbering Plan",
1st Hundred Block Extension
16th Hundred B&ck Extension

Conditions

There are two types of directory numbers: the
Primary Directory Number (PDN) and the
Secondary Directory Number (SDN).
For further details of PDN, refer to Section 4-B-3.01
"PDN Button." For SDN, refer to Section 4-B-3.02
'SDN Button."
If you assign onfy one digit in "System-Numbering
Plan", 1 st Hundred Block Extension through 16th
Hundred Block Extension, you can assign
digit DNs which start with the preassigned digit in
"Configuration-DN Assignment."
if you assign leading two digits in "System-
Numbering Plan," you can assign four-digit
which start with the pre-assigned two digits in
"Configuration-DN Assignment."
Technical Manuals Online! - http://www.tech-man.com
Reference
9-c-3.00 10-c-3.00
9-D-6.01 16-C-l 0.66
9-D-6.02
.
.
<Example>
System-Numbering Plan
to
Dumb
3-B-5
(70695)
Numbering Plan (Ol/ll)
8099 are assignable. )
are
assignable. -
1
1
1