Troubleshooting - Panasonic DP-C266 Operating Instructions Manual

Troubleshooting

Unit Does Not Operate
Is the display dark?
Does the Energy Saver key flash (or light),
and is the display turned OFF?
Do any of the U## code and messages
appear on the display?
(U1, U4, U6, U7, U11....etc.)
Do the Add Staples Indicator and message
appear on the display?
Do the Add Paper Indicator and message
appear on the display? (
Do the Paper Misfeed Indicator and message
appear on the display? (J##)
Does the error message "Remove paper from
inner tray" appear on the display?
Do E#-## Indicator and message appear on
the display?
The machine does not accept the next job
during operation, instructed job would not be
accepted for a long time period, or job would
not be completed.
Light Copies
Is the Density level set to the "Lighter" side?
Do the Add Toner Indicator and message
appear on the display? (
If the measures outlined above do not solve the problem, call the authorized Panasonic dealer.
24
Check
)
)
Action
Check if the Power Switches (Main Power
Switch on the rear and Power Switch on the
front side of the machine) are turned ON and if
the power cord is plugged into the AC outlet.
Press the Energy Saver key on the Control
Panel.
Perform operations in accordance with each
message. Refer to the Operating Instructions
(For Maintenance) of provided CD-ROM.
Add staples.
Remove all jammed staples.
Refer to the Operating Instructions (For
Maintenance) of provided CD-ROM.
Add papers. Refer to the Operating
Instructions (For Maintenance) of provided CD-
ROM.
Remove the misfed paper. Refer to the
Operating Instructions (For Maintenance) of
provided CD-ROM.
Remove the paper from inner tray.
(For the capacity of Inner Tray, see page 28.)
Turn OFF the Power Switch on the front side
and the Main Power Switch on the rear of the
machine, and then turn them back ON. If the
error code has not been cleared, call the
authorized Panasonic dealer.
Turn OFF the Power Switch on the front side
and the Main Power Switch on the rear of the
machine, and then turn them back ON. If the
machine still does not accept the next job, call
the authorized Panasonic dealer.
Select "Darker".
Replace the Toner Cartridge.
Refer to the Operating Instructions (For
Maintenance) of provided CD-ROM.