Brother MFC-8510DN Basic User's Manual page 101

Error Message
Too Many Files
Unusable Device
Remove the
Device. Turn the
power off and
back on again.
Unusable Device
Wrong Paper Size
Cause
There are too many files stored
on the USB Flash memory
drive.
A defective USB device or a
high power consumption USB
device has been connected to
the USB direct interface.
A USB device or USB Flash
memory drive that is encrypted
or not supported has been
connected to the USB direct
interface.
The machine cannot find paper
of the same size in another tray
when the paper tray in use has
run out of paper during a copy
operation.
Action
Reduce the number of files stored on the USB
Flash memory drive.
Unplug the device from the USB direct
interface. Turn the machine off and then on
again.
Unplug the device from the USB direct
interface.
(See the specifications for supported USB
Flash memory drives in Printing data from a
USB Flash memory drive or digital camera
supporting mass storage uu page 55.)
Load the paper in the paper tray shown on the
LCD.
Troubleshooting
B
89