Brother MFC-J220 User Manual page 34

01:4 01:41 1:41
01. 01. 2010 01. 01. 2010 01. 01. 2010
Fax Mem.
4 Start keys:
 Mono Start
Lets you start sending faxes or making
copies in monochrome. Also lets you start a
scanning operation (in colour or mono
depending on the scanning setting in the
ControlCenter software).
 Colour Start
Lets you start sending faxes or making
copies in full colour. Also lets you start a
scanning operation (in colour or mono,
depending on the scanning setting in the
ControlCenter software).
5 Stop/Exit
Stops an operation or exits the menu.
6 LCD (Liquid Crystal Display)
Displays messages on the screen to help you
set up and use your machine.
2 3
7 Dial Pad
Use these keys to dial telephone and fax
numbers and as a keyboard for entering
information into the machine.
The # key lets you temporarily switch the
dialling mode during a telephone call from
Pulse to Tone. (Not available in New Zealand)
8 On/Off
You can turn the machine on and off.
Press On/Off to turn the machine on.
Press and hold down On/Off to turn the machine
off. The LCD will show Shutting Down and will
stay on for a few seconds before going off.
If you have connected an external telephone or
TAD, it is always available.
If you turn the machine off, it will still
periodically clean the print head to maintain
print quality. To prolong print head life, provide
the best ink cartridge economy, and maintain
print quality, you should keep your machine
connected to the power at all times.
Note
Most of the illustrations in this User's Guide
show the MFC-J415W.
General information
5
4
5
1