Brother HL Series Technical Reference Manual page 251

2. PCL-Specific Variables
The following values are PCL (HP LaserJet emulation) specific and can be set and requested using PJL.
These variables must be set using the LPARM : PCL option.
Variables Description
FONTSOURCE The valid values for
FONTSOURCE are
I (Internal Fonts)
C (Cartridge Fonts)
C1 (Card Fonts)
S (Permanent Soft Fonts)
If the specified value becomes
invalid, it is automatically changed
to the default value.
FONTNUMBER Font number. This value can be
seen on the Print Font Test selected
from the Control Panel. This value
is automatically changed to the
lowest value whenever the
FONTSOURCE setting is changed.
PITCH Pitch of the default font in units of
characters per inch. The pitch value
can be specified to two decimal
places
PTSIZE Height of the default font in units
of points. The point size can be
specified to a quarter of a point
SYMSET Symbol set
LEFTMARGIN Sets the left margin.
RIGHTMARGIN Sets the right margin
TOPMARGIN Sets the top margin
BOTMARGIN Sets the bottom margin.
FORMLINES Sets the number of lines per page.
AUTOLF Sets AUTO LF
AUTOCR Sets AUTO CR
AUTOWRAP Sets AUTO WRAP
AUTOSKIP Sets AUTO SKIP
3. PostScript-Specific Variable
The currently defined PostScript specific variable is listed as follows. This variable can be set using the
LPARM : POSTSCRIPT option.
Variable Description
PRTPSERRS The printing of a PostScript error
page is enabled or disabled by this
variable
CHAPTER 5 PJL - 51
Sample Value Range
I, C, C1, S,
0, 1, 2, ..n
0.44, 0.45, 99.99
4.00, 4.25, .......999.75
ROMAN8, ISOL1, ISOL2, ISOL5,
PC8, PC8DN, PC850, PC852, PC8TK,
WINL1, WINL2, WINL5, DESKTOP,
PSTEXT, VNINTL, VNUS,
MSPUBL, MATH8, PSMATH,
VNMATH, PIFONT, LEGAL, ISO2,
ISO4, ISO6, ISO10, ISO11, ISO 14,
ISO15, ISO16, ISO17, ISO21, ISO 25,
ISO 57, ISO60, ISO61, ISO69, ISO84,
ISO85, WIN30, HPGERM, HPSPAN,
MCTEXT
0 to 145 columns
10 to 155 columns
0, 0.33, 0.5, 1.0, 1.5, 2.0 inch
0, 0.33, 0.5, 1.0, 1.5, 2.0 inch
5 to 128 lines
ON or OFF
ON or OFF
ON or OFF
ON or OFF
Sample Value Range
OFF, ON
2009/06/29