Qa Mode Settings; Procedures To Change Parameters - Canon MLT (S) User Manual

3. QA Mode Settings

3.1 Procedures to Change Parameters

Image processing of exposure image with CXDI is called QA (Quality Assurance) Processing,
and can be performed by adjusting the parameters on the QA Mode screen to optimize the expo-
sure image.
1
Display the QA Mode screen
Display the QA Mode screen by one of the following methods:
To display the QA Mode screen automatically right after x-ray exposure
On the Exposure screen, touch the followings to display the DISPLAYING PARAME-
TER CHANGE/QA SCREEN DURING EXPOSURE screen:
[SYSTEM] > [SETUP MENU] > [SYSTEM SETUP] > [DISPLAYING PARAME-
TER CHANGE/QA SCREEN DURING EXPOSURE]
Then set the QA Mode screen effective.
To perform QA Processing right after x-ray exposure
Touch [QA] on the Preview screen.
To perform QA Processing after examination
Select the exposure image from the Study List, display the selected image, then touch
[QA].
QA Mode Screen
– 11 –
Continued on the following page >>