Toshiba e-STUDIO190F Operator's Manual page 116

No.
143 RELAY XMT REPORT
144 EMAIL CHARACTER
145 SENDER SELECTION
146
147 AUTO POP RCV
148 DELETE POP RCV
149 DELETE POP ERROR
150 IFAX RETURN RECEIPT
151 EMAIL HEADER
152 SUB-ADDRESS
153
154 ROUTING HEADER
155 PRINT ROUTED
156 PRINT FORWARDED
157 TRANSACTION
158 PC REMOTE UPDATE
116
Setting Your Machine
Fax Parameters
Parameter Setting
Number
SET
POP TIMER
EMAIL
EMAIL
FORMAT
ROUTING
TSI ROUTING
FORMAT
DOCUMENT
DOCUMENT
JOURNAL
Setting
1 Off Setting how the COMM. Journal for relayed
transmission is sent to the originator.
*2 Always
Off
3 Inc. Only
Always
Inc. Only : Send only if communication has failed.
1 Japanese Selecting the Character Set when receiving or sending
email text.
*2 English
*1 Invalid Selecting a pre-programmed sender's name and email
address before each transmission.
2 Valid
---- 0 to 60 min. Setting the time interval for the machine to check for
email on the POP Server.
*3
(0 = Does not check the POP Server for email.)
1 Invalid Selecting whether the machine automatically
downloads an email from the POP Server.
*2 Valid
1 Invalid Selecting whether the email will be deleted
automatically after retrieval from the POP Server.
*2 Valid
*1 Invalid Selecting whether to delete the email that includes an
incompatible file attachment from the POP Server.
2 Valid
1 Invalid Selecting whether to send a return receipt when
receiving from another TOSHIBA TEC Internet Fax.
*2 Valid
1 All Selecting the header information to print when an
email is received. (Normally used for Troubleshooting.
*2 Subject/
It shows the path of the email transmission before
From/To
arriving at your machine.)
3 Off
*1 Invalid Selecting whether to automatically route a received
email using ITU-T sub-address.
2 Valid
*1 Invalid Selecting whether to route a received fax to an email
address preprogrammed in Phone Book using the
2 Valid
originating fax's Numeric ID (TSI frame information).
*1 Originator Selecting the type of email header to be included in the
"From" field of each routed faxes.
2 Relay Station
Originator
Relay Station :The routing station's email address
*1 Inc. Only Selecting whether a received fax to be routed is always
printed or only when the routing operation fails.
2 Always
*1 Inc. Only Selecting whether a memory received fax or email to
be forwarded is always printed or only when
2 Always
forwarding is incomplete.
*1 Invalid Selecting whether the machine sends a transaction
journal to the pre-programmed email address.
2 Valid
*1 Invalid Selecting whether the machine will accept commands
from an email application, to:
2 Valid
(a) Program the Internet Parameters
(b) Program the Auto Dialer
(c) Allow retrieval of the Journal
Comments
: Don't send.
: Always send.
:The originating fax machine's TSI will
appear in the "From" field of the
routed email.
will appear in the "From" field of the
routed email.